Re: [PATCH V4 2/2] arm: dts: dra7: add crossbar device binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




* Sricharan R <r.sricharan@xxxxxx> [140626 01:36]:
> Hi Tony,
> 
> On Thursday 26 June 2014 01:14 PM, Tony Lindgren wrote:
> > * Sricharan R <r.sricharan@xxxxxx> [140626 00:29]:
> >> From: R Sricharan <r.sricharan@xxxxxx>
> >>
> >> There is a IRQ crossbar device in the soc, which
> >> maps the irq requests from the peripherals to the
> >> mpu interrupt controller's inputs. The Peripheral irq
> >> requests are connected to only one crossbar
> >> input and the output of the crossbar is connected to only one
> >> controller's input line. The crossbar device is used to map
> >> a peripheral input to a free mpu's interrupt controller line.
> >>
> >> Here, adding a new crossbar device node and replacing all the peripheral
> >> interrupt numbers with its fixed crossbar input lines.
> > 
> > I think these two patches need to be a single patch to avoid
> > breaking booting for git bisect inbetween these patches?
>   This does not cause booting issues. irq_desc gets allocated linearly,
>    but that does not create boot issues.

OK

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux