Hi, On Thu, Nov 19, 2020 at 12:43:04PM +0530, Manivannan Sadhasivam wrote: > Hello, > > This series adds support for parsing the partitions defined in Shared > Memory (SMEM) of the Qualcomm platforms supporting NAND interface. > Current parser only supports V3 and V4 of the partition tables. > > This series has been tested on SDX55 MTP board which has an onboard NAND > device. > Any update on this series? Thanks, Mani > Thanks, > Mani > > Changes in v3: > > * Handled le32 parameters in parser, collected review from Linus W. > > Changes in v2: > > * Added additionalProperties: false and removed unit address in binding > > Manivannan Sadhasivam (4): > dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser > mtd: parsers: Add Qcom SMEM parser > mtd: rawnand: qcom: Add support for Qcom SMEM parser > mtd: parsers: afs: Fix freeing the part name memory in failure > > .../mtd/partitions/qcom,smem-part.yaml | 33 ++++ > drivers/mtd/nand/raw/qcom_nandc.c | 4 +- > drivers/mtd/parsers/Kconfig | 8 + > drivers/mtd/parsers/Makefile | 1 + > drivers/mtd/parsers/afs.c | 4 +- > drivers/mtd/parsers/qcomsmempart.c | 170 ++++++++++++++++++ > 6 files changed, 216 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml > create mode 100644 drivers/mtd/parsers/qcomsmempart.c > > -- > 2.17.1 >
