From: Nishanth Menon <nm@xxxxxx> On certain platforms such as DRA7, SPIs 0, 1, 2, 3, 5, 6, 10, 131, 132, 133 are direct wired to hardware blocks bypassing crossbar. This quirky implementation is *NOT* supposed to be the expectation of crossbar hardware usage. However, these are already marked in our description of the hardware with SKIP and RESERVED where appropriate. Unfortunately, we need to be able to refer to these hardwired IRQs. So, to request these, crossbar driver can use the existing information from it's table that these SKIP/RESERVED maps are direct wired sources and generic allocation/programming of crossbar should be avoided. Signed-off-by: Nishanth Menon <nm@xxxxxx> Signed-off-by: Sricharan R <r.sricharan@xxxxxx> Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> --- .../devicetree/bindings/arm/omap/crossbar.txt | 12 ++++++++++-- drivers/irqchip/irq-crossbar.c | 20 ++++++++++++++++++-- 2 files changed, 28 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index 35356b6..51a85c3 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -44,8 +44,10 @@ Documentation/devicetree/bindings/arm/gic.txt for further details. An interrupt consumer on an SoC using crossbar will use: interrupts = <GIC_SPI request_number interrupt_level> -request number shall be between 0 to that described by -"ti,max-crossbar-sources" +When the request number is between 0 to that described by +"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the +request_number is greater than "ti,max-crossbar-sources", then it is mapped as a +quirky hardware mapping direct to GIC. Example: device_x@0x4a023000 { @@ -53,3 +55,9 @@ Example: interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; ... }; + + device_y@0x4a033000 { + /* Direct mapped GIC SPI 1 used */ + interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>; + ... + }; diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c index 83f803b..85c2985 100644 --- a/drivers/irqchip/irq-crossbar.c +++ b/drivers/irqchip/irq-crossbar.c @@ -86,8 +86,13 @@ static inline int allocate_free_irq(int cb_no) static inline bool needs_crossbar_write(irq_hw_number_t hw) { - if (hw > GIC_IRQ_START) - return true; + int cb_no; + + if (hw > GIC_IRQ_START) { + cb_no = cb->irq_map[hw - GIC_IRQ_START]; + if (cb_no != IRQ_RESERVED && cb_no != IRQ_SKIP) + return true; + } return false; } @@ -130,8 +135,19 @@ static int crossbar_domain_xlate(struct irq_domain *d, { int ret; int req_num = intspec[1]; + int direct_map_num; if (req_num >= cb->max_crossbar_sources) { + direct_map_num = req_num - cb->max_crossbar_sources; + if (direct_map_num < cb->int_max) { + ret = cb->irq_map[direct_map_num]; + if (ret == IRQ_RESERVED || ret == IRQ_SKIP) { + /* We use the interrupt num as h/w irq num */ + ret = direct_map_num; + goto found; + } + } + pr_err("%s: requested crossbar number %d > max %d\n", __func__, req_num, cb->max_crossbar_sources); return -EINVAL; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html