RE: [PATCH v5 01/16] dt-bindings: dma: Add YAML schemas for dw-axi-dmac

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

I think I still need the 'ref', but can remove the 'allOf'. 

Thanks
Regards
Jee Heng

> -----Original Message-----
> From: Sia, Jee Heng
> Sent: 09 December 2020 11:21 AM
> To: Rob Herring <robh@xxxxxxxxxx>
> Cc: vkoul@xxxxxxxxxx; Eugeniy.Paltsev@xxxxxxxxxxxx;
> andriy.shevchenko@xxxxxxxxxxxxxxx; dmaengine@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
> Subject: RE: [PATCH v5 01/16] dt-bindings: dma: Add YAML schemas
> for dw-axi-dmac
> 
> Hi Rob,
> 
> Regarding the comment " You don't need to use allOf with a $ref
> anymore."
> I get dt compile error after remove the allOf and $ref. Error message
> shown below:
>                 '$ref' is a required property
>                 'allOf' is a required property
> 
>   snps,dma-masters:
>     description: |
>       Number of AXI masters supported by the hardware.
>     enum: [1, 2]
>     default: 2
> 
> Thanks
> Regards
> Jee Heng
> 
> > -----Original Message-----
> > From: Rob Herring <robh@xxxxxxxxxx>
> > Sent: 01 December 2020 6:26 AM
> > To: Sia, Jee Heng <jee.heng.sia@xxxxxxxxx>
> > Cc: vkoul@xxxxxxxxxx; Eugeniy.Paltsev@xxxxxxxxxxxx;
> > andriy.shevchenko@xxxxxxxxxxxxxxx; dmaengine@xxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH v5 01/16] dt-bindings: dma: Add YAML schemas
> for
> > dw-axi-dmac
> >
> > On Mon, Nov 23, 2020 at 10:34:37AM +0800, Sia Jee Heng wrote:
> > > YAML schemas Device Tree (DT) binding is the new format for DT
> to
> > > replace the old format. Introduce YAML schemas DT binding for
> > > dw-axi-dmac and remove the old version.
> > >
> > > Signed-off-by: Sia Jee Heng <jee.heng.sia@xxxxxxxxx>
> > > ---
> > >  .../bindings/dma/snps,dw-axi-dmac.txt         |  39 ------
> > >  .../bindings/dma/snps,dw-axi-dmac.yaml        | 126
> > ++++++++++++++++++
> > >  2 files changed, 126 insertions(+), 39 deletions(-)  delete mode
> > > 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-
> > dmac.txt
> > >  create mode 100644
> > > Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> > > b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> > > deleted file mode 100644
> > > index dbe160400adc..000000000000
> > > --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-
> > dmac.txt
> > > +++ /dev/null
> > > @@ -1,39 +0,0 @@
> > > -Synopsys DesignWare AXI DMA Controller
> > > -
> > > -Required properties:
> > > -- compatible: "snps,axi-dma-1.01a"
> > > -- reg: Address range of the DMAC registers. This should include
> > > -  all of the per-channel registers.
> > > -- interrupt: Should contain the DMAC interrupt number.
> > > -- dma-channels: Number of channels supported by hardware.
> > > -- snps,dma-masters: Number of AXI masters supported by the
> > hardware.
> > > -- snps,data-width: Maximum AXI data width supported by
> hardware.
> > > -  (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
> > > -- snps,priority: Priority of channel. Array size is equal to the
> > > number of
> > > -  dma-channels. Priority value must be programmed within
> > > [0:dma-channels-1]
> > > -  range. (0 - minimum priority)
> > > -- snps,block-size: Maximum block size supported by the controller
> > channel.
> > > -  Array size is equal to the number of dma-channels.
> > > -
> > > -Optional properties:
> > > -- snps,axi-max-burst-len: Restrict master AXI burst length by value
> > > specified
> > > -  in this property. If this property is missing the maximum AXI
> > > burst length
> > > -  supported by DMAC is used. [1:256]
> > > -
> > > -Example:
> > > -
> > > -dmac: dma-controller@80000 {
> > > -	compatible = "snps,axi-dma-1.01a";
> > > -	reg = <0x80000 0x400>;
> > > -	clocks = <&core_clk>, <&cfgr_clk>;
> > > -	clock-names = "core-clk", "cfgr-clk";
> > > -	interrupt-parent = <&intc>;
> > > -	interrupts = <27>;
> > > -
> > > -	dma-channels = <4>;
> > > -	snps,dma-masters = <2>;
> > > -	snps,data-width = <3>;
> > > -	snps,block-size = <4096 4096 4096 4096>;
> > > -	snps,priority = <0 1 2 3>;
> > > -	snps,axi-max-burst-len = <16>;
> > > -};
> > > diff --git
> > > a/Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.yaml
> > > b/Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.yaml
> > > new file mode 100644
> > > index 000000000000..6c2e8e612af5
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-
> > dmac.yaml
> > > @@ -0,0 +1,126 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> %YAML
> > 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/dma/snps,dw-axi-
> dmac.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Synopsys DesignWare AXI DMA Controller
> > > +
> > > +maintainers:
> > > +  - Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx
> > > +
> > > +description: |
> >
> > Don't need '|' unless there's formatting to preserve.
> >
> > > + Synopsys DesignWare AXI DMA Controller DT Binding
> >
> > And should be 2 space indent.
> >
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - snps,axi-dma-1.01a
> > > +
> > > +  reg:
> > > +    items:
> > > +      - description: Address range of the DMAC registers
> >
> > Just 'maxItems: 1'
> >
> > > +
> > > +  reg-names:
> > > +    items:
> > > +      - const: axidma_ctrl_regs
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: Bus Clock
> > > +      - description: Module Clock
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: core-clk
> > > +      - const: cfgr-clk
> > > +
> > > +  '#dma-cells':
> > > +    const: 1
> > > +
> > > +  dma-channels:
> > > +    description: |
> > > +      Number of channels supported by hardware.
> >
> > No need to describe a common property. You do need to provide
> some
> > constraints. I'd assume there's less than 2^32 channels.
> >
> > > +
> > > +  snps,dma-masters:
> > > +    description: |
> > > +      Number of AXI masters supported by the hardware.
> > > +    allOf:
> >
> > You don't need to use allOf with a $ref anymore.
> >
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - enum: [1, 2]
> > > +        default: 2
> > > +
> > > +  snps,data-width:
> > > +    description: |
> > > +      AXI data width supported by hardware.
> > > +      (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +      - enum: [0, 1, 2, 3, 4, 5, 6]
> > > +        default: 4
> > > +
> > > +  snps,priority:
> > > +    description: |
> > > +      Channel priority specifier associated with the DMA channels.
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +      - minItems: 1
> > > +        maxItems: 8
> > > +        default: [0, 1, 2, 3]
> > > +
> > > +  snps,block-size:
> > > +    description: |
> > > +      Channel block size specifier associated with the DMA
> channels.
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +      - minItems: 1
> > > +        maxItems: 8
> > > +        default: [4096, 4096, 4096, 4096]
> > > +
> > > +  snps,axi-max-burst-len:
> > > +    description: |
> > > +      Restrict master AXI burst length by value specified in this
> > property.
> > > +      If this property is missing the maximum AXI burst length
> > supported by
> > > +      DMAC is used. [1:256]
> >
> > Looks like some constraints.
> >
> > > +    allOf:
> > > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > > +        default: 16
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - clocks
> > > +  - clock-names
> > > +  - interrupts
> > > +  - '#dma-cells'
> > > +  - dma-channels
> > > +  - snps,dma-masters
> > > +  - snps,data-width
> > > +  - snps,priority
> > > +  - snps,block-size
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +     #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > +     #include <dt-bindings/interrupt-controller/irq.h>
> > > +     /* example with snps,dw-axi-dmac */
> > > +     dmac: dma-controller@80000 {
> > > +         compatible = "snps,axi-dma-1.01a";
> > > +         reg = <0x80000 0x400>;
> > > +         clocks = <&core_clk>, <&cfgr_clk>;
> > > +         clock-names = "core-clk", "cfgr-clk";
> > > +         interrupt-parent = <&intc>;
> > > +         interrupts = <27>;
> > > +         #dma-cells = <1>;
> > > +         dma-channels = <4>;
> > > +         snps,dma-masters = <2>;
> > > +         snps,data-width = <3>;
> > > +         snps,block-size = <4096 4096 4096 4096>;
> > > +         snps,priority = <0 1 2 3>;
> > > +         snps,axi-max-burst-len = <16>;
> > > +     };
> > > --
> > > 2.18.0
> > >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux