On 12/08/2020 10:48 PM, Sergei Shtylyov wrote:
On 12/8/20 1:47 PM, zhangqing wrote:
Add spi-ls7a binding documentation.
Signed-off-by: Qing Zhang <zhangqing@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/spi/spi-ls7a.txt | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-ls7a.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-ls7a.txt b/Documentation/devicetree/bindings/spi/spi-ls7a.txt
new file mode 100644
index 0000000..56247b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-ls7a.txt
@@ -0,0 +1,31 @@
+Binding for LOONGSON LS7A SPI controller
+
+Required properties:
+- compatible: should be "pci0014,7a0b.0","pci0014,7a0b","pciclass088000","pciclass0880".
+- reg: reference IEEE Std 1275-1994.
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+- #interrupts: No hardware interrupt.
You say it's a required prop, yet yuoe example doesn't have it...
I want to emphasize here that LS7A SPI has no hardware interrupts, and DT is not actually used.
The why document the property at all?
Thank you for your reply again,
I will remove the #interrupt attribute in the third edition.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+ spi@16,0 {
+ compatible = "pci0014,7a0b.0",
+ "pci0014,7a0b",
+ "pciclass088000",
+ "pciclass0880";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xb000 0x0 0x0 0x0 0x0>;
+ num-chipselects = <0>;
+ spiflash: s25fl016k@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
Once more?
+ compatible ="spansion,s25fl016k","jedec,spi-nor";
Once more?
+ spi-max-frequency=<50000000>;
+ reg=<0>;
Once more? Did you mean this for a child node?
Yes, these are child node attributes, the child node splash is not necessary.
You should indent the child nodes with 1 more tab...
I will do it and send the v3 in the soon.
+ };
+ };
Thanks
-Qing
MBR, Sergei