On Thu, Nov 26, 2020 at 12:59:27PM +0100, Geert Uytterhoeven wrote:
> The R-Car PCIe controller does not use interrupts when configured
> for endpoint mode, hence the bindings do not document the interrupt
> property. However, all DTS files provide interrupts properties, and
> thus fail to validate.
>
> Fix this by documenting the interrupts property.
>
> Fixes: 5be478f9c24fbdf8 ("dt-bindings: Another round of adding missing 'additionalProperties'")
I don't think this fixes is appropriate. The commit itself wasn't
broken, this binding is.
> Fixes: 4c0f80920923f103 ("dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller")
> Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> ---
> Alternatively, the interrupts properties should be removed from the
> corresponding device nodes in the DTS files. Obviously they should be
> retained in the device nodes representing PCIe controllers configured in
> host mode, which describe the same hardware...
No, I think this patch is the right change. EP and host bindings should
be similiar.
Fix your Sob and resend please.
Rob
