On Mon, Dec 07, 2020 at 04:19:16PM -0800, Guenter Roeck wrote: > On Mon, Dec 07, 2020 at 03:12:59PM -0600, Rob Herring wrote: > > On Tue, Nov 17, 2020 at 11:08:07PM +0100, Krzysztof Kozlowski wrote: > > > Convert the Analog Devices ADM1275 bindings to dt-schema. > > > > > > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > > > --- > > > .../bindings/hwmon/adi,adm1275.yaml | 58 +++++++++++++++++++ > > > .../devicetree/bindings/hwmon/adm1275.txt | 25 -------- > > > Documentation/hwmon/adm1275.rst | 2 +- > > > 3 files changed, 59 insertions(+), 26 deletions(-) > > > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml > > > delete mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt > > > > > > diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml > > > new file mode 100644 > > > index 000000000000..2cad28c499dc > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml > > > @@ -0,0 +1,58 @@ > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > + > > > +$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors > > > + > > > +maintainers: > > > + - Krzysztof Kozlowski <krzk@xxxxxxxxxx> > > > + > > > +description: | > > > + The ADM1293 and ADM1294 are high accuracy integrated digital power monitors > > > + that offer digital current, voltage, and power monitoring using an on-chip, > > > + 12-bit analog-to-digital converter (ADC), communicated through a PMBus > > > + compliant I2C interface. > > > + > > > + Datasheets: > > > + https://www.analog.com/en/products/adm1294.html > > > + > > > +properties: > > > + compatible: > > > + enum: > > > + - adi,adm1075 > > > + - adi,adm1272 > > > + - adi,adm1275 > > > + - adi,adm1276 > > > + - adi,adm1278 > > > + - adi,adm1293 > > > + - adi,adm1294 > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + shunt-resistor-micro-ohms: > > > + description: > > > + Shunt resistor value in micro-Ohm. > > > + $ref: /schemas/types.yaml#/definitions/uint32 > > > > Don't need a type if you have units. With that dropped, > > > > Sorry, I am not familiar with the terminology. Does that refer to > the '$ref' line ? Yes, it's the $ref line which can be safely removed. The core dt-schema applies such $ref if the property name ends with '-micro-ohms'. Best regards, Krzysztof
