On Tue, Nov 17, 2020 at 11:08:04PM +0100, Krzysztof Kozlowski wrote:
> Convert the TI INA2xx bindings to dt-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Applied.
Thanks,
Guenter
> ---
> .../devicetree/bindings/hwmon/ina2xx.txt | 24 --------
> .../devicetree/bindings/hwmon/ti,ina2xx.yaml | 55 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 56 insertions(+), 25 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/ina2xx.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ina2xx.txt b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
> deleted file mode 100644
> index 02af0d94e921..000000000000
> --- a/Documentation/devicetree/bindings/hwmon/ina2xx.txt
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -ina2xx properties
> -
> -Required properties:
> -- compatible: Must be one of the following:
> - - "ti,ina209" for ina209
> - - "ti,ina219" for ina219
> - - "ti,ina220" for ina220
> - - "ti,ina226" for ina226
> - - "ti,ina230" for ina230
> - - "ti,ina231" for ina231
> -- reg: I2C address
> -
> -Optional properties:
> -
> -- shunt-resistor
> - Shunt resistor value in micro-Ohm
> -
> -Example:
> -
> -ina220@44 {
> - compatible = "ti,ina220";
> - reg = <0x44>;
> - shunt-resistor = <1000>;
> -};
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
> new file mode 100644
> index 000000000000..6f0443322a36
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +
> +$id: http://devicetree.org/schemas/hwmon/ti,ina2xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments INA209 family of power/voltage monitors
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> +
> +description: |
> + The INA209 is a high-side current shunt and power monitor with
> + an I2C interface.
> +
> + Datasheets:
> + https://www.ti.com/product/INA209
> +
> +properties:
> + compatible:
> + enum:
> + - ti,ina209
> + - ti,ina219
> + - ti,ina220
> + - ti,ina226
> + - ti,ina230
> + - ti,ina231
> +
> + reg:
> + maxItems: 1
> +
> + shunt-resistor:
> + description:
> + Shunt resistor value in micro-Ohm.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + power-sensor@44 {
> + compatible = "ti,ina220";
> + reg = <0x44>;
> + shunt-resistor = <1000>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0818a5b03832..e9ba2e555679 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8669,7 +8669,7 @@ INA209 HARDWARE MONITOR DRIVER
> M: Guenter Roeck <linux@xxxxxxxxxxxx>
> L: linux-hwmon@xxxxxxxxxxxxxxx
> S: Maintained
> -F: Documentation/devicetree/bindings/hwmon/ina2xx.txt
> +F: Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
> F: Documentation/hwmon/ina209.rst
> F: drivers/hwmon/ina209.c
>
