Re: [PATCH v24 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rob Herring is the maintainer of all the yaml files - he is the one this patch
needs to go to.  I merely look at them to understand the platform device
implementation.

On Mon, Nov 30, 2020 at 07:57:16AM -0800, Ben Levinsky wrote:
> Add binding for ZynqMP R5 OpenAMP.
> 
> Represent the RPU domain resources in one device node. Each RPU
> processor is a subnode of the top RPU domain node.
> 
> Signed-off-by: Jason Wu <j.wu@xxxxxxxxxx>
> Signed-off-by: Wendy Liang <jliang@xxxxxxxxxx>
> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> Signed-off-by: Ben Levinsky <ben.levinsky@xxxxxxxxxx>
> ---
> v24: update for 'make dt_binding_check' errors
> ---
>  .../xilinx,zynqmp-r5-remoteproc.yaml          | 223 ++++++++++++++++++
>  1 file changed, 223 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
> new file mode 100644
> index 000000000000..bccbdee8c3f2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
> @@ -0,0 +1,223 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Xilinx R5 remote processor controller bindings
> +
> +description:
> +  This document defines the binding for the remoteproc component that loads and
> +  boots firmwares on the Xilinx Zynqmp and Versal family chipsets.
> +
> +  Note that the Linux has global addressing view of the R5-related memory (TCM)
> +  so the absolute address ranges are provided in TCM reg's.
> +
> +maintainers:
> +  - Ed Mooring <ed.mooring@xxxxxxxxxx>
> +  - Ben Levinsky <ben.levinsky@xxxxxxxxxx>
> +
> +properties:
> +  $nodename:
> +    pattern: "^r5fss(@.*)?"
> +
> +  compatible:
> +    enum:
> +      - xlnx,zynqmp-r5-remoteproc
> +
> +  reg:
> +    items:
> +      - description: Address and Size of Xilinx RPU Configuration register
> +
> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 2
> +
> +  ranges: true
> +
> +# Optional properties:
> +# --------------------
> +  xlnx,cluster-mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1]
> +    description: |
> +      Configuration Mode for the Dual R5F cores within the R5F cluster.
> +      Should be either a value of 1 (LockStep mode) or 0 (Split mode),
> +      default is LockStep mode if omitted.
> +
> +
> +#R5F Processor Child Nodes:
> +# ==========================
> +
> +patternProperties:
> +  "^r5f_[a-f0-9]+$":
> +    type: object
> +    description: |
> +      The R5F Sub-System device node should define one or two R5F child nodes,
> +      each node representing a Xilinx instantiation of the Arm Cortex R5F core.
> +      There should be one or two child nodes if the R5F is in Split mode and
> +      one child node if the R5F is in Lockstep mode.
> +
> +      In Split mode each R5F core has two associated TCM Banks. R5_0 has
> +      TCM Banks 0A and 0B and R5_1 has TCM Banks 1A and 1B.
> +
> +      In Lockstep mode only one R5F child node should be defined. This one
> +      child has access to TCM Banks 0A, 0B, 1A and 1B and any of the four can
> +      be included in the child R5F's sram property.
> +
> +      The example below shows Split mode with two child nodes.
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - xilinx,r5f
> +
> +# The following properties are mandatory for R5F Core0 in both LockStep and Split
> +# modes, and are mandatory for R5F Core1 _only_ in Split mode.
> +
> +      memory-region:
> +        description: |
> +          Phandles to the memory nodes to be associated with the

Is a word missing here?

> +          The reserved memory nodes should be carveout nodes, and
> +          should be defined with a "no-map" property as per the bindings in
> +          Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> +        minItems: 1
> +        maxItems: 6
> +        items:
> +          - description: Region used for dynamic DMA allocations like vrings and
> +                         vring buffers
> +          - description: region reserved for firmware image sections
> +        additionalItems: true
> +
> +      power-domain:
> +        description: |
> +          Power node ID that is used to uniquely identify the RPU for Xilinx
> +          Power Management.
> +        maxItems: 1
> +
> +# Optional properties:
> +# --------------------
> +# The following properties are optional properties for each of the R5F cores:
> +
> +      mboxes:
> +        description: |
> +          Standard property to specify a mailbox
> +          This property is required only if the rpmsg/virtio functionality
> +          is used
> +
> +           Refer to the zynqmp-ipi-mailbox documentation for client usage of this
> +           property

Indentation problem

> +        maxItems: 1
> +
> +      mbox-names:
> +        description: |
> +          Refer to the zynqmp-ipi-mailbox documentation for client usage of this
> +          property
> +        items:
> +          - const: tx
> +          - const: rx
> +
> +      sram:
> +        $ref: /schemas/types.yaml#/definitions/phandle-array
> +        minItems: 1
> +        maxItems: 4
> +        description: |
> +          Phandles to one or more reserved on-chip SRAM regions. The regions
> +          should be defined as child nodes of the respective SRAM node, and
> +          should be defined as per the generic bindings in,
> +          Documentation/devicetree/bindings/sram/sram.yaml
> +
> +    required:
> +      - compatible
> +      - power-domain
> +
> +    unevaluatedProperties: false
> +
> +required:
> +  - reg
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    / {
> +        compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        model = "ZynqMP ZCU102 ";
> +
> +        zynqmp_ipi1 {
> +          compatible = "xlnx,zynqmp-ipi-mailbox";
> +          interrupt-parent = <&gic>;
> +          interrupts = <0 33 4>;
> +          xlnx,ipi-id = <5>;
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          ipi_mailbox_rpu0: mailbox@ff990600 {
> +            reg = <0xff990600 0x20>,
> +                  <0xff990620 0x20>,
> +                  <0xff9900c0 0x20>,
> +                  <0xff9900e0 0x20>;
> +            reg-names = "local_request_region",
> +            "local_response_region",
> +            "remote_request_region",
> +            "remote_response_region";
> +            #mbox-cells = <1>;
> +            xlnx,ipi-id = <3>;
> +          };
> +          ipi_mailbox_rpu1: mailbox@ff990780 {
> +            reg = <0xff990780 0x20>,
> +                  <0xff9907a0 0x20>,
> +                  <0xff9907c0 0x20>,
> +                  <0xff9905a0 0x20>;
> +            reg-names = "local_request_region",
> +            "local_response_region",
> +            "remote_request_region",
> +            "remote_response_region";
> +            #mbox-cells = <1>;
> +            xlnx,ipi-id = <3>;
> +          };
> +        };
> +
> +        r5fss@ff9a0000 {
> +          compatible = "xlnx,zynqmp-r5-remoteproc";
> +          #address-cells = <2>;
> +          #size-cells = <2>;
> +          ranges;
> +          reg = <0x0 0xff9a0000 0x0 0x10000>;
> +          xlnx,cluster-mode = <0>;
> +
> +          r5f_0 {
> +               compatible = "xilinx,r5f";
> +               memory-region = <&elf_load0>,
> +                               <&rpu0vdev0vring0>,
> +                               <&rpu0vdev0vring1>,
> +                               <&rpu0vdev0buffer>;
> +               sram = <&tcm_0a>, <&tcm_0b>;
> +               mboxes = <&ipi_mailbox_rpu0 0x0 &ipi_mailbox_rpu0 0x1>;
> +               mbox-names = "tx", "rx";
> +               power-domain = <0x7>;
> +          };
> +          r5f_1 {
> +               compatible = "xilinx,r5f";
> +               memory-region = <&elf_load1>,
> +                               <&rpu1vdev0vring0>,
> +                               <&rpu1vdev0vring1>,
> +                               <&rpu1vdev0buffer>;
> +               sram = <&tcm_1a>, <&tcm_1b>;
> +               mboxes = <&ipi_mailbox_rpu1 0x0 &ipi_mailbox_rpu1 0x1>;
> +               mbox-names = "tx", "rx";
> +               power-domain = <0x8>;
> +          };
> +
> +        };
> +    };
> +
> +...
> -- 
> 2.17.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux