Javier, On Wed, Jun 25, 2014 at 12:03 PM, Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> wrote: > Like most clock drivers, the Maxim 77686 PMIC clock binding > follows the convention that the "#clock-cells" property is > used to specify the number of cells in a clock provider. > > But the binding document is not clear enough that it shall > be set to 1 since the PMIC support multiple clocks outputs. > > Also, explain that the clocks identifiers are defined in a > header file that can be included by Device Tree source with > client nodes to avoid using magic numbers. > > Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> > --- > > Changes since v3: > - Don't change clock-names property to make clear that it's > the consumer clock name and should not match the producer clock. > Suggested by Doug Anderson. > > Documentation/devicetree/bindings/clock/maxim,max77686.txt | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html