Add support for SAMA7G5 gigabit ethernet interface.
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
drivers/net/ethernet/cadence/macb_main.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index deb232801edb..ca56476b3a04 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -4465,6 +4465,14 @@ static const struct macb_usrio_config macb_default_usrio = {
.refclk = MACB_BIT(CLKEN),
};
+static const struct macb_usrio_config sama7g5_usrio = {
+ .mii = 0,
+ .rmii = 1,
+ .rgmii = 2,
+ .refclk = BIT(2),
+ .hdfctlen = BIT(6),
+};
+
static const struct macb_config fu540_c000_config = {
.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
MACB_CAPS_GEM_HAS_PTP,
@@ -4558,6 +4566,14 @@ static const struct macb_config zynq_config = {
.usrio = &macb_default_usrio,
};
+static const struct macb_config sama7g5_gem_config = {
+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG,
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
+ .usrio = &sama7g5_usrio,
+};
+
static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "cdns,at32ap7000-macb" },
{ .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
@@ -4575,6 +4591,7 @@ static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "cdns,zynqmp-gem", .data = &zynqmp_config},
{ .compatible = "cdns,zynq-gem", .data = &zynq_config },
{ .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config },
+ { .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, macb_dt_ids);
--
2.7.4
