This series adds support for the Allwinner V3-based SL631 family of
Action Cameras, starting with the IMX179 fashion.
A few fixes to V3 support are added along the way, most notably support
for the NMI IRQ controller which is necessary for the AXP209 IRQ.
Note that some patches in this series may have already been submitted
(but not yet merged) by others and are included for the series to build.
Changes since v2:
- Reused A80 binding for V3s NMI since registers are the same;
- Changes SL631 buttons (up/down/ok) which better reflect reality.
Changes since v1:
- Rework commit log messages as requested;
- Fixed v3s nmi controller compatible order in dt bindings doc;
- Changed SL631 compatible vendor to allwinner;
- Fixed LRADC button node names;
- Removed unused LDO4 regulator node;
- Removed merged patches.
Paul Kocialkowski (5):
dt-bindings: irq: sun7i-nmi: Add binding documentation for the V3s NMI
ARM: dts: sun8i-v3s: Add the V3s NMI IRQ controller
ARM: dts: sun8i: Cleanup the Pinecube AXP209 node
dt-bindings: arm: sunxi: Add SL631 with IMX179 bindings
ARM: dts: sun8i-v3: Add support for the SL631 Action Camera with
IMX179
.../devicetree/bindings/arm/sunxi.yaml | 6 +
.../allwinner,sun7i-a20-sc-nmi.yaml | 3 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun8i-s3-pinecube.dts | 8 +-
arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts | 12 ++
arch/arm/boot/dts/sun8i-v3-sl631.dtsi | 138 ++++++++++++++++++
arch/arm/boot/dts/sun8i-v3s.dtsi | 11 +-
7 files changed, 172 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts
create mode 100644 arch/arm/boot/dts/sun8i-v3-sl631.dtsi
--
2.29.2
