We've performed some work on the Generic USB HCD, xHCI and DWC USB3 DT bindings in the framework of the Baikal-T1 SoC support integration into the kernel. This patchset is a result of that work. First of all we moved the generic USB properties from the legacy text bindings to the USB DT schema. The properties have been distributed between three DT schemas dedicated for particular types of USB controllers: Generic USB controller properties (like node-naming, phys, maximum-speed, etc), Generic USB Host Controller bindings (companion and TPL support), Dual-Role USB Controller (OTG revision, DR mode, HNP/SRP/ADP protocols, etc). So the USB controllers DT bindings from now can validate the nodes against a generic USB-controller schema suitable for the controller functionality. Secondly we converted generic USB xHCI text bindings file into the DT schema. It had to be split up into two bindings: DT schema with generic xHCI properties and a generic xHCI device DT schema. The later will be used to validate the pure xHCI-based nodes, while the former can be utilized by some vendor-specific versions of xHCI. Thirdly, what was primarily intended to be done for Baikal-T1 SoC USB we converted the legacy text-based DWC USB3 bindings to DT schema and altered the result a bit so it would be more coherent with what actually controller and its driver support. Since we've now got the DWC USB3 DT schema, we made it used to validate the sub-nodes of the Qualcom, TI and Amlogic DWC3 DT nodes. Link: https://lore.kernel.org/linux-usb/20201010224121.12672-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ Changelog v2: - Thanks to Sergei Shtylyov for suggesting the commit logs grammar fixes: [PATCH 04/18] dt-bindings: usb: usb-hcd: Add "ulpi/serial/hsic" PHY types [PATCH 05/18] dt-bindings: usb: usb-hcd: Add "tpl-support" property [PATCH 11/18] dt-bindings: usb: dwc3: Add interrupt-names property support [PATCH 13/18] dt-bindings: usb: dwc3: Add Tx De-emphasis restrictions [PATCH 17/18] dt-bindings: usb: keystone-dwc3: Validate DWC3 sub-node - Set FL-adj of the amlogiv,meson-g12a-usb controller with value 0x20 instead of completely removing the property. - Drop the patch: [PATCH 02/18] dt-bindings: usb: usb-hcd: Add "wireless" maximum-speed property value since "wireless" speed type is depracated due to lack of the device supporting it. - Drop quotes from around the compat string constant. - Discard '|' from the property descriptions, since we don't need to preserve the text formatting. - Convert abbreviated form of the "maximum-speed" enum constraint into the multi-lined version of the list. - Fix the DW USB3 "clock-names" prop description to be refererring to the enumerated clock-names instead of the ones from the Databook. - Add explicit "additionalProperties: true" to the usb-xhci.yaml schema, since additionalProperties/unevaluatedProperties are going to be mandary for each binding. - Use "oneOf: [dwc2.yaml#, snps,dwc3.yaml#]" instead of the bulky "if: properties: compatibe: ..." statement. - Discard the "^dwc3@[0-9a-f]+$" nodes from being acceptable as sub-nodes of the Qualcomm DWC3 DT nodes. - Add new patches: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name [PATCH 19/20] arch: dts: Fix xHCI DT nodes name [PATCH 20/20] arch: dts: Fix DWC USB3 DT nodes name Link: https://lore.kernel.org/linux-usb/20201014101402.18271-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx Changelog v3: - Drop the patches: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name [PATCH 19/20] arch: dts: Fix xHCI DT nodes name [PATCH 20/20] arch: dts: Fix DWC USB3 DT nodes name as they are going to be submitted in the framework of a dedicated patchset. - Drop the patch: [PATCH 11/20] dt-bindings: usb: dwc3: Add synopsys,dwc3 compatible string since it's going to be replaced with the driver/dts fixup and moved to a dedicated patchset. - Apply usb-xhci.yaml# schema for the DWC USB3 node only if the controller is supposed to work as either host or otg. Link: https://lore.kernel.org/linux-usb/20201020112101.19077-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx Changelog v4: - Get the patch [PATCH 11/17] dt-bindings: usb: dwc3: Add synopsys,dwc3 compatible string back, since we can't discard the deprecated prefix from the driver. - Discard the block scalar style modifier "|" from the interrupts property description. - Split the generic USB controller properties into three schemas: Generic USB controllers, USB Host controllers and USB OTG controllers. Link: https://lore.kernel.org/linux-usb/20201111090853.14112-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx Changelog v5: - Add "snps,dis-split-quirk" property to the DWC USB3 DT schema. - Add a text to the [PATCH v4 10/18] dt-bindings: usb: Convert DWC USB3 bindings to DT schema patch log about the small change in the clock-related properties bindings with respect to the original binding file. - Discard duplicated "additionalProperties" from the usb-hcd.yaml schema. - Make sure dr_mode exist in DW USB3 node to apply the USB-gadget-only schema. - Add a new patch: [PATCH v5 19/19] dt-bindings: usb: intel,keembay-dwc3: Validate DWC3 sub-node since the Intel Keem Bay DWC3 bindings has been just added. Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@xxxxxxxxxxxxxxxxxxxx> Cc: Andy Gross <agross@xxxxxxxxxx> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Cc: Manu Gautam <mgautam@xxxxxxxxxxxxxx> Cc: Roger Quadros <rogerq@xxxxxx> Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Cc: Kevin Hilman <khilman@xxxxxxxxxxxx> Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Cc: Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@xxxxxxxxx> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-snps-arc@xxxxxxxxxxxxxxxxxxx Cc: linux-mips@xxxxxxxxxxxxxxx Cc: linuxppc-dev@xxxxxxxxxxxxxxxx Cc: linux-usb@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Serge Semin (19): dt-bindings: usb: usb-hcd: Detach generic USB controller properties dt-bindings: usb: Convert generic USB properties to DT schemas dt-bindings: usb: usb-drd: Add "otg-rev" property constraints dt-bindings: usb: Add "ulpi/serial/hsic" PHY types dt-bindings: usb: usb-hcd: Add "tpl-support" property dt-bindings: usb: Add generic "usb-phy" property dt-bindings: usb: Convert xHCI bindings to DT schema dt-bindings: usb: xhci: Add Broadcom STB v2 compatible device dt-bindings: usb: renesas-xhci: Refer to the usb-xhci.yaml file dt-bindings: usb: Convert DWC USB3 bindings to DT schema dt-bindings: usb: dwc3: Add interrupt-names property support dt-bindings: usb: dwc3: Add synopsys,dwc3 compatible string dt-bindings: usb: dwc3: Add Tx De-emphasis constraints dt-bindings: usb: dwc3: Add Frame Length Adj constraints dt-bindings: usb: meson-g12a-usb: Fix FL-adj property value dt-bindings: usb: meson-g12a-usb: Validate DWC2/DWC3 sub-nodes dt-bindings: usb: keystone-dwc3: Validate DWC3 sub-node dt-bindings: usb: qcom,dwc3: Validate DWC3 sub-node dt-bindings: usb: intel,keembay-dwc3: Validate DWC3 sub-node .../usb/amlogic,meson-g12a-usb-ctrl.yaml | 6 +- .../devicetree/bindings/usb/dwc3.txt | 128 ------- .../devicetree/bindings/usb/generic-xhci.yaml | 65 ++++ .../devicetree/bindings/usb/generic.txt | 57 --- .../bindings/usb/intel,keembay-dwc3.yaml | 9 +- .../devicetree/bindings/usb/qcom,dwc3.yaml | 9 +- .../bindings/usb/renesas,usb-xhci.yaml | 4 +- .../devicetree/bindings/usb/snps,dwc3.yaml | 332 ++++++++++++++++++ .../bindings/usb/ti,keystone-dwc3.yaml | 4 +- .../devicetree/bindings/usb/usb-drd.yaml | 78 ++++ .../devicetree/bindings/usb/usb-hcd.yaml | 19 +- .../devicetree/bindings/usb/usb-xhci.txt | 41 --- .../devicetree/bindings/usb/usb-xhci.yaml | 42 +++ .../devicetree/bindings/usb/usb.yaml | 60 ++++ 14 files changed, 600 insertions(+), 254 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt create mode 100644 Documentation/devicetree/bindings/usb/generic-xhci.yaml delete mode 100644 Documentation/devicetree/bindings/usb/generic.txt create mode 100644 Documentation/devicetree/bindings/usb/snps,dwc3.yaml create mode 100644 Documentation/devicetree/bindings/usb/usb-drd.yaml delete mode 100644 Documentation/devicetree/bindings/usb/usb-xhci.txt create mode 100644 Documentation/devicetree/bindings/usb/usb-xhci.yaml create mode 100644 Documentation/devicetree/bindings/usb/usb.yaml -- 2.29.2
