Update the Broadcom SATA PHY Device Tree binding to a YAML format. Suggested-by: Vinod Koul <vkoul@xxxxxxxxxx> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- Changes in v2: - fixed #phy-cells warning - fixed yamlling warnings .../bindings/phy/brcm,sata-phy.yaml | 148 ++++++++++++++++++ .../devicetree/bindings/phy/brcm-sata-phy.txt | 61 -------- 2 files changed, 148 insertions(+), 61 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/brcm-sata-phy.txt diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml new file mode 100644 index 000000000000..58c3ef8004ad --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/brcm,sata-phy.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Broadcom SATA3 PHY + +maintainers: + - Florian Fainelli <f.fainelli@xxxxxxxxx> + +properties: + $nodename: + pattern: "^sata[-|_]phy(@.*)?$" + + compatible: + oneOf: + - items: + - enum: + - brcm,bcm7216-sata-phy + - brcm,bcm7425-sata-phy + - brcm,bcm7445-sata-phy + - brcm,bcm63138-sata-phy + - const: brcm,phy-sata3 + - items: + - const: brcm,iproc-nsp-sata-phy + - items: + - const: brcm,iproc-ns2-sata-phy + - items: + - const: brcm,iproc-sr-sata-phy + + reg: + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: phy + - const: phy-ctrl + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^sata-phy@[0-9]+$": + type: object + description: | + Each port's PHY should be represented as a sub-node. + + properties: + reg: + description: The SATA PHY port number + maxItems: 1 + + "#phy-cells": + const: 0 + + "brcm,enable-ssc": + $ref: /schemas/types.yaml#/definitions/flag + description: | + Use spread spectrum clocking (SSC) on this port + This property is not applicable for "brcm,iproc-ns2-sata-phy", + "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". + + "brcm,rxaeq-mode": + $ref: /schemas/types.yaml#/definitions/string + description: + String that indicates the desired RX equalizer mode. + enum: + - off + - auto + - manual + + "brcm,rxaeq-value": + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + When 'brcm,rxaeq-mode' is set to "manual", provides the RX + equalizer value that should be used. + minimum: 0 + maximum: 63 + + "brcm,tx-amplitude-millivolt": + description: | + Transmit amplitude voltage in millivolt. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [400, 500, 600, 800] + + required: + - reg + - "#phy-cells" + + additionalProperties: false + +if: + properties: + compatible: + items: + const: brcm,iproc-ns2-sata-phy +then: + properties: + reg: + maxItems: 2 + reg-names: + items: + - const: "phy" + - const: "phy-ctrl" +else: + properties: + reg: + maxItems: 1 + reg-names: + maxItems: 1 + items: + - const: "phy" + +required: + - compatible + - "#address-cells" + - "#size-cells" + - reg + - reg-names + +additionalProperties: false + +examples: + - | + sata_phy@f0458100 { + compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; + reg = <0xf0458100 0x1e00>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + + sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt deleted file mode 100644 index e5abbace93a3..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Broadcom SATA3 PHY - -Required properties: -- compatible: should be one or more of - "brcm,bcm7216-sata-phy" - "brcm,bcm7425-sata-phy" - "brcm,bcm7445-sata-phy" - "brcm,iproc-ns2-sata-phy" - "brcm,iproc-nsp-sata-phy" - "brcm,phy-sata3" - "brcm,iproc-sr-sata-phy" - "brcm,bcm63138-sata-phy" -- address-cells: should be 1 -- size-cells: should be 0 -- reg: register ranges for the PHY PCB interface -- reg-names: should be "phy" and "phy-ctrl" - The "phy-ctrl" registers are only required for - "brcm,iproc-ns2-sata-phy" and "brcm,iproc-sr-sata-phy". - -Sub-nodes: - Each port's PHY should be represented as a sub-node. - -Sub-nodes required properties: -- reg: the PHY number -- phy-cells: generic PHY binding; must be 0 - -Sub-nodes optional properties: -- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port - This property is not applicable for "brcm,iproc-ns2-sata-phy", - "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". - -- brcm,rxaeq-mode: string that indicates the desired RX equalizer - mode, possible values are: - "off" (equivalent to not specifying the property) - "auto" - "manual" (brcm,rxaeq-value is used in that case) - -- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX - equalizer value that should be used. Allowed range is 0..63. - -- brcm,tx-amplitude-millivolt: transmit amplitude voltage in millivolt. - Possible values are 400, 500, 600 or 800 mV. - -Example - sata-phy@f0458100 { - compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; - reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; - reg-names = "phy"; - #address-cells = <1>; - #size-cells = <0>; - - sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - }; - - sata-phy@1 { - reg = <1>; - #phy-cells = <0>; - }; - }; -- 2.25.1
