[PATCH 2/3] PCI: designware: use untranslated address while programming ATU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




In DRA7, the cpu sees 32bit address, but the pcie controller can see only 28bit
address. So whenever the cpu issues a read/write request, the 4 most
significant bits are used by L3 to determine the target controller.
For example, the cpu reserves 0x2000_0000 - 0x2FFF_FFFF for PCIe controller but
the PCIe controller will see only (0x000_0000 - 0xFFF_FFF). So for programming
the outbound translation window the *base* should be programmed as 0x000_0000.
Whenever we try to write to say 0x2000_0000, it will be translated to whatever
we have programmed in the translation window with base as 0x000_0000.

This is needed when the dt node is modelled something like below
axi {
	compatible = "simple-bus";
	#size-cells = <1>;
	#address-cells = <1>;
	ranges = <0x0        0x20000000 0x10000000 // 28-bit bus
		  0x51000000 0x51000000 0x3000>;
	pcie@51000000 {
		reg = <0x1000 0x2000>, <0x51002000 0x14c>, <0x51000000 0x2000>;
		reg-names = "config", "ti_conf", "rc_dbics";
		#address-cells = <3>;
		#size-cells = <2>;
		ranges = <0x81000000 0 0          0x03000 0 0x00010000
			  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
	};
};

Here the CPU address for configuration space is 0x20013000 and the controller
address for configuration space is 0x13000. The controller address should be
used while programming the ATU (in order for translation to happen properly in
DRA7xx).

Cc: Jason Gunthorpe <jgunthorpe@xxxxxxxxxxxxxxxxxxxx>
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Mohit Kumar <mohit.kumar@xxxxxx>
Cc: Jingoo Han <jg1.han@xxxxxxxxxxx>
Cc: Marek Vasut <marex@xxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 drivers/pci/host/pcie-designware.c |   49 ++++++++++++++++++++++++++++--------
 drivers/pci/host/pcie-designware.h |    4 +++
 2 files changed, 42 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 0b7b455..11aba6d 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -401,8 +401,15 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
 	struct of_pci_range range;
 	struct of_pci_range_parser parser;
 	struct resource *cfg_res;
-	u32 val;
-	int i;
+	u32 val, na, ns;
+	const __be32 *addrp;
+	int i, index;
+
+	/* Find the address cell size and the number of cells in order to get
+	 * the untranslated address.
+	 */
+	of_property_read_u32(np, "#address-cells", &na);
+	ns = of_n_size_cells(np);
 
 	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
 	if (cfg_res) {
@@ -410,6 +417,12 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
 		pp->config.cfg1_size = resource_size(cfg_res)/2;
 		pp->cfg0_base = cfg_res->start;
 		pp->cfg1_base = cfg_res->start + pp->config.cfg0_size;
+
+		/* Find the untranslated configuration space address */
+		index = of_property_match_string(np, "reg-names", "config");
+		addrp = of_get_address(np, index, false, false);
+		pp->cfg0_mod_addr = of_read_number(addrp, ns);
+		pp->cfg1_mod_addr = pp->cfg0_mod_addr + pp->config.cfg0_size;
 	} else {
 		dev_err(pp->dev, "missing *config* reg space\n");
 	}
@@ -435,12 +448,20 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
 			pp->config.io_size = resource_size(&pp->io);
 			pp->config.io_bus_addr = range.pci_addr;
 			pp->io_base = range.cpu_addr;
+
+			/* Find the untranslated IO space address */
+			pp->io_mod_addr = of_read_number(parser.range -
+							 parser.np + na, ns);
 		}
 		if (restype == IORESOURCE_MEM) {
 			of_pci_range_to_resource(&range, np, &pp->mem);
 			pp->mem.name = "MEM";
 			pp->config.mem_size = resource_size(&pp->mem);
 			pp->config.mem_bus_addr = range.pci_addr;
+
+			/* Find the untranslated MEM space address */
+			pp->mem_mod_addr = of_read_number(parser.range -
+							  parser.np + na, ns);
 		}
 		if (restype == 0) {
 			of_pci_range_to_resource(&range, np, &pp->cfg);
@@ -448,6 +469,12 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
 			pp->config.cfg1_size = resource_size(&pp->cfg)/2;
 			pp->cfg0_base = pp->cfg.start;
 			pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
+
+			/* Find the untranslated configuration space address */
+			pp->cfg0_mod_addr = of_read_number(parser.range -
+							   parser.np + na, ns);
+			pp->cfg1_mod_addr = pp->cfg0_mod_addr +
+					    pp->config.cfg0_size;
 		}
 	}
 
@@ -522,9 +549,9 @@ static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev)
 	/* Program viewport 0 : OUTBOUND : CFG0 */
 	dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
 			  PCIE_ATU_VIEWPORT);
-	dw_pcie_writel_rc(pp, pp->cfg0_base, PCIE_ATU_LOWER_BASE);
-	dw_pcie_writel_rc(pp, (pp->cfg0_base >> 32), PCIE_ATU_UPPER_BASE);
-	dw_pcie_writel_rc(pp, pp->cfg0_base + pp->config.cfg0_size - 1,
+	dw_pcie_writel_rc(pp, pp->cfg0_mod_addr, PCIE_ATU_LOWER_BASE);
+	dw_pcie_writel_rc(pp, (pp->cfg0_mod_addr >> 32), PCIE_ATU_UPPER_BASE);
+	dw_pcie_writel_rc(pp, pp->cfg0_mod_addr + pp->config.cfg0_size - 1,
 			  PCIE_ATU_LIMIT);
 	dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
 	dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
@@ -538,9 +565,9 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
 	dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
 			  PCIE_ATU_VIEWPORT);
 	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
-	dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE);
-	dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE);
-	dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
+	dw_pcie_writel_rc(pp, pp->cfg1_mod_addr, PCIE_ATU_LOWER_BASE);
+	dw_pcie_writel_rc(pp, (pp->cfg1_mod_addr >> 32), PCIE_ATU_UPPER_BASE);
+	dw_pcie_writel_rc(pp, pp->cfg1_mod_addr + pp->config.cfg1_size - 1,
 			  PCIE_ATU_LIMIT);
 	dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
 	dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
@@ -553,9 +580,9 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
 	dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
 			  PCIE_ATU_VIEWPORT);
 	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
-	dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
-	dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
-	dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
+	dw_pcie_writel_rc(pp, pp->mem_mod_addr, PCIE_ATU_LOWER_BASE);
+	dw_pcie_writel_rc(pp, (pp->mem_mod_addr >> 32), PCIE_ATU_UPPER_BASE);
+	dw_pcie_writel_rc(pp, pp->mem_mod_addr + pp->config.mem_size - 1,
 			  PCIE_ATU_LIMIT);
 	dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
 	dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index 77f592f..13828f8 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -36,11 +36,15 @@ struct pcie_port {
 	u8			root_bus_nr;
 	void __iomem		*dbi_base;
 	u64			cfg0_base;
+	u64			cfg0_mod_addr;
 	void __iomem		*va_cfg0_base;
 	u64			cfg1_base;
+	u64			cfg1_mod_addr;
 	void __iomem		*va_cfg1_base;
 	u64			io_base;
+	u64			io_mod_addr;
 	u64			mem_base;
+	u64			mem_mod_addr;
 	struct resource		cfg;
 	struct resource		io;
 	struct resource		mem;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux