For P2P delay measurement, the ingress time stamp of the PDelay_Req is
required for the correction field of the PDelay_Resp. The application
echoes back the correction field of the PDelay_Req when sending the
PDelay_Resp.
Some hardware (like the ZHAW InES PTP time stamping IP core) subtracts
the ingress timestamp autonomously from the correction field, so that
the hardware only needs to add the egress timestamp on tx. Other
hardware (like the Microchip KSZ9563) reports the ingress time stamp via
an interrupt and requires that the software provides this time stamp via
tail-tag on tx.
In order to avoid introducing a further application interface for this,
the driver can simply emulate the behavior of the InES device and
subtract the ingress time stamp in software from the correction field.
On egress, the correction field can either be kept as it is (and the
time stamp field in the tail-tag is set to zero) or move the value from
the correction field back to the tail-tag.
Changing the correction field requires updating the UDP checksum (if UDP
is used as transport).
Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
---
include/linux/ptp_classify.h | 73 ++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h
index cc0da0b134a4..f19f2f6a9475 100644
--- a/include/linux/ptp_classify.h
+++ b/include/linux/ptp_classify.h
@@ -10,8 +10,12 @@
#ifndef _PTP_CLASSIFY_H_
#define _PTP_CLASSIFY_H_
+#include <asm/unaligned.h>
#include <linux/ip.h>
+#include <linux/ktime.h>
#include <linux/skbuff.h>
+#include <linux/udp.h>
+#include <net/checksum.h>
#define PTP_CLASS_NONE 0x00 /* not a PTP event message */
#define PTP_CLASS_V1 0x01 /* protocol version 1 */
@@ -123,6 +127,67 @@ static inline u8 ptp_get_msgtype(const struct ptp_header *hdr,
return msgtype;
}
+/**
+ * ptp_check_diff8 - Computes new checksum (when altering a 64-bit field)
+ * @old: old field value
+ * @new: new field value
+ * @oldsum: previous checksum
+ *
+ * This function can be used to calculate a new checksum when only a single
+ * field is changed. Similar as ip_vs_check_diff*() in ip_vs.h.
+ *
+ * Return: Updated checksum
+ */
+static inline __wsum ptp_check_diff8(__be64 old, __be64 new, __wsum oldsum)
+{
+ __be64 diff[2] = { ~old, new };
+
+ return csum_partial(diff, sizeof(diff), oldsum);
+}
+
+/**
+ * ptp_header_update_correction - Update PTP header's correction field
+ * @skb: packet buffer
+ * @type: type of the packet (see ptp_classify_raw())
+ * @hdr: ptp header
+ * @correction: new correction value
+ *
+ * This updates the correction field of a PTP header and updates the UDP
+ * checksum (if UDP is used as transport). It is needed for hardware capable of
+ * one-step P2P that does not already modify the correction field of Pdelay_Req
+ * event messages on ingress.
+ */
+static inline
+void ptp_header_update_correction(struct sk_buff *skb, unsigned int type,
+ struct ptp_header *hdr, s64 correction)
+{
+ __be64 correction_old;
+ struct udphdr *uhdr;
+
+ /* previous correction value is required for checksum update. */
+ memcpy(&correction_old, &hdr->correction, sizeof(correction_old));
+
+ /* write new correction value */
+ put_unaligned_be64((u64)correction, &hdr->correction);
+
+ switch (type & PTP_CLASS_PMASK) {
+ case PTP_CLASS_IPV4:
+ case PTP_CLASS_IPV6:
+ /* locate udp header */
+ uhdr = (struct udphdr *)((char *)hdr - sizeof(struct udphdr));
+ break;
+ default:
+ return;
+ }
+
+ /* update checksum */
+ uhdr->check = csum_fold(ptp_check_diff8(correction_old,
+ hdr->correction,
+ ~csum_unfold(uhdr->check)));
+ if (!uhdr->check)
+ uhdr->check = CSUM_MANGLED_0;
+}
+
void __init ptp_classifier_init(void);
#else
static inline void ptp_classifier_init(void)
@@ -145,5 +210,13 @@ static inline u8 ptp_get_msgtype(const struct ptp_header *hdr,
*/
return PTP_MSGTYPE_SYNC;
}
+
+static inline
+void ptp_onestep_p2p_move_t2_to_correction(struct sk_buff *skb,
+ unsigned int type,
+ struct ptp_header *hdr,
+ ktime_t t2)
+{
+}
#endif
#endif /* _PTP_CLASSIFY_H_ */
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
