Add NXP PF8100/PF8121A/PF8200 regulator driver.
PF8100/PF8121A/PF8200 is PMIC designed for highperformance
consumer applications. It features seven high efficiency buck,
four linear and one vsnvs regulators.
Tested in Engicam i.Core MX8M Mini SOM platform boards.
Signed-off-by: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
Note: driver referenced from nxp sources, so I kept the initial
author and licence as it is. any comments on this regard would
appreciated?
MAINTAINERS | 6 +
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pf8x00-regulator.c | 496 +++++++++++++++++++++++++++
4 files changed, 511 insertions(+)
create mode 100644 drivers/regulator/pf8x00-regulator.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 6d24bd30b99e..e9d79df57278 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12672,6 +12672,12 @@ S: Maintained
F: Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
F: drivers/gpu/drm/imx/dcss/
+NXP PF8100/PF8121A/PF8200 PMIC REGULATOR DEVICE DRIVER
+M: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
+S: Maintained
+F: Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+F: drivers/regulator/pf8x00-regulator.c
+
NXP PTN5150A CC LOGIC AND EXTCON DRIVER
M: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
L: linux-kernel@xxxxxxxxxxxxxxx
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ca908bd6999b..88b27c25c476 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -812,6 +812,14 @@ config REGULATOR_PCF50633
Say Y here to support the voltage regulators and converters
on PCF50633
+config REGULATOR_PF8X00
+ tristate "NXP PF8100/PF8121A/PF8200 regulator driver"
+ depends on I2C && OF
+ select REGMAP_I2C
+ help
+ Say y here to support the regulators found on the NXP
+ PF8100/PF8121A/PF8200 PMIC.
+
config REGULATOR_PFUZE100
tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4e5a06f82de6..680e539f6579 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o
+obj-$(CONFIG_REGULATOR_PF8X00) += pf8x00-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o
diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
new file mode 100644
index 000000000000..308c27fa6ea8
--- /dev/null
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 NXP
+ * Copyright (C) 2019 Boundary Devices
+ * Copyright (C) 2020 Amarula Solutions(India)
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+/* registers */
+#define PF8X00_DEVICEID 0x00
+#define PF8X00_REVID 0x01
+#define PF8X00_EMREV 0x02
+#define PF8X00_PROGID 0x03
+#define PF8X00_IMS_INT 0x04
+#define PF8X00_IMS_THERM 0x07
+#define PF8X00_SW_MODE_INT 0x0a
+#define PF8X00_SW_MODE_MASK 0x0b
+#define PF8X00_IMS_SW_ILIM 0x12
+#define PF8X00_IMS_LDO_ILIM 0x15
+#define PF8X00_IMS_SW_UV 0x18
+#define PF8X00_IMS_SW_OV 0x1b
+#define PF8X00_IMS_LDO_UV 0x1e
+#define PF8X00_IMS_LDO_OV 0x21
+#define PF8X00_IMS_PWRON 0x24
+#define PF8X00_SYS_INT 0x27
+#define PF8X00_HARD_FAULT 0x29
+#define PF8X00_FSOB_FLAGS 0x2a
+#define PF8X00_FSOB_SELECT 0x2b
+#define PF8X00_ABIST_OV1 0x2c
+#define PF8X00_ABIST_OV2 0x2d
+#define PF8X00_ABIST_UV1 0x2e
+#define PF8X00_ABIST_UV2 0x2f
+#define PF8X00_TEST_FLAGS 0x30
+#define PF8X00_ABIST_RUN 0x31
+#define PF8X00_RANDOM_GEN 0x33
+#define PF8X00_RANDOM_CHK 0x34
+#define PF8X00_VMONEN1 0x35
+#define PF8X00_VMONEN2 0x36
+#define PF8X00_CTRL1 0x37
+#define PF8X00_CTRL2 0x38
+#define PF8X00_CTRL3 0x39
+#define PF8X00_PWRUP_CTRL 0x3a
+#define PF8X00_RESETBMCU 0x3c
+#define PF8X00_PGOOD 0x3d
+#define PF8X00_PWRDN_DLY1 0x3e
+#define PF8X00_PWRDN_DLY2 0x3f
+#define PF8X00_FREQ_CTRL 0x40
+#define PF8X00_COINCELL_CTRL 0x41
+#define PF8X00_PWRON 0x42
+#define PF8X00_WD_CONFIG 0x43
+#define PF8X00_WD_CLEAR 0x44
+#define PF8X00_WD_EXPIRE 0x45
+#define PF8X00_WD_COUNTER 0x46
+#define PF8X00_FAULT_COUNTER 0x47
+#define PF8X00_FSAFE_COUNTER 0x48
+#define PF8X00_FAULT_TIMER 0x49
+#define PF8X00_AMUX 0x4a
+#define PF8X00_SW1_CONFIG1 0x4d
+#define PF8X00_LDO1_CONFIG1 0x85
+#define PF8X00_VSNVS_CONFIG1 0x9d
+#define PF8X00_PAGE_SELECT 0x9f
+
+/* regulators */
+enum pf8x00_regulators {
+ PF8X00_LDO1,
+ PF8X00_LDO2,
+ PF8X00_LDO3,
+ PF8X00_LDO4,
+ PF8X00_BUCK1,
+ PF8X00_BUCK2,
+ PF8X00_BUCK3,
+ PF8X00_BUCK4,
+ PF8X00_BUCK5,
+ PF8X00_BUCK6,
+ PF8X00_BUCK7,
+ PF8X00_VSNVS,
+
+ PF8X00_MAX_REGULATORS,
+};
+
+enum pf8x00_buck_states {
+ SW_CONFIG1,
+ SW_CONFIG2,
+ SW_PWRUP,
+ SW_MODE1,
+ SW_RUN_VOLT,
+ SW_STBY_VOLT,
+};
+#define PF8X00_SW_BASE(i) (8 * (i - PF8X00_BUCK1) + PF8X00_SW1_CONFIG1)
+
+enum pf8x00_ldo_states {
+ LDO_CONFIG1,
+ LDO_CONFIG2,
+ LDO_PWRUP,
+ LDO_RUN_VOLT,
+ LDO_STBY_VOLT,
+};
+#define PF8X00_LDO_BASE(i) (6 * (i - PF8X00_LDO1) + PF8X00_LDO1_CONFIG1)
+
+enum swxilim_bits {
+ SWXILIM_2100_MA,
+ SWXILIM_2600_MA,
+ SWXILIM_3000_MA,
+ SWXILIM_4500_MA,
+};
+#define PF8X00_SWXILIM_SHIFT 3
+#define PF8X00_SWXILIM_MASK GENMASK(4, 3)
+#define PF8X00_SWXPHASE_MASK GENMASK(2, 0)
+#define PF8X00_SWXPHASE_DEFAULT 0
+#define PF8X00_SWXPHASE_SHIFT 7
+
+enum pf8x00_devid {
+ PF8100 = 0x0,
+ PF8121A = BIT(1),
+ PF8200 = BIT(3),
+};
+#define PF8X00_FAM BIT(6)
+#define PF8X00_DEVICE_FAM_MASK GENMASK(7, 4)
+#define PF8X00_DEVICE_ID_MASK GENMASK(3, 0)
+
+struct pf8x00_regulator {
+ struct regulator_desc desc;
+ u8 ilim;
+ u8 phase_shift;
+};
+
+struct pf8x00_chip {
+ struct regmap *regmap;
+ struct device *dev;
+};
+
+static const struct regmap_config pf8x00_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = PF8X00_PAGE_SELECT,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+/* VLDOx output: 1.5V to 5.0V */
+static const int pf8x00_ldo_voltages[] = {
+ 1500000, 1600000, 1800000, 1850000, 2150000, 2500000, 2800000, 3000000,
+ 3100000, 3150000, 3200000, 3300000, 3350000, 1650000, 1700000, 5000000,
+};
+
+#define SWV(i) (6250 * i + 400000)
+#define SWV_LINE(i) SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \
+ SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7)
+
+/* Output: 0.4V to 1.8V */
+static const int pf8x00_sw1_to_6_voltages[] = {
+ SWV_LINE(0),
+ SWV_LINE(1),
+ SWV_LINE(2),
+ SWV_LINE(3),
+ SWV_LINE(4),
+ SWV_LINE(5),
+ SWV_LINE(6),
+ SWV_LINE(7),
+ SWV_LINE(8),
+ SWV_LINE(9),
+ SWV_LINE(10),
+ SWV_LINE(11),
+ SWV_LINE(12),
+ SWV_LINE(13),
+ SWV_LINE(14),
+ SWV_LINE(15),
+ SWV_LINE(16),
+ SWV_LINE(17),
+ SWV_LINE(18),
+ SWV_LINE(19),
+ SWV_LINE(20),
+ SWV_LINE(21),
+ 1500000, 1800000,
+};
+
+/* Output: 1.0V to 4.1V */
+static const int pf8x00_sw7_voltages[] = {
+ 1000000, 1100000, 1200000, 1250000, 1300000, 1350000, 1500000, 1600000,
+ 1800000, 1850000, 2000000, 2100000, 2150000, 2250000, 2300000, 2400000,
+ 2500000, 2800000, 3150000, 3200000, 3250000, 3300000, 3350000, 3400000,
+ 3500000, 3800000, 4000000, 4100000, 4100000, 4100000, 4100000, 4100000,
+};
+
+/* Output: 1.8V, 3.0V, or 3.3V */
+static const int pf8x00_vsnvs_voltages[] = {
+ 0, 1800000, 3000000, 3300000,
+};
+
+static struct pf8x00_regulator *desc_to_regulator(const struct regulator_desc *desc)
+{
+ return container_of(desc, struct pf8x00_regulator, desc);
+}
+
+static void swxilim_select(const struct regulator_desc *desc, int ilim)
+{
+ struct pf8x00_regulator *data = desc_to_regulator(desc);
+ u8 ilim_sel;
+
+ switch (ilim) {
+ case 2100:
+ ilim_sel = SWXILIM_2100_MA;
+ break;
+ case 2600:
+ ilim_sel = SWXILIM_2600_MA;
+ break;
+ case 3000:
+ ilim_sel = SWXILIM_3000_MA;
+ break;
+ case 4500:
+ ilim_sel = SWXILIM_4500_MA;
+ break;
+ default:
+ ilim_sel = SWXILIM_2100_MA;
+ break;
+ }
+
+ data->ilim = ilim_sel;
+}
+
+static int pf8x00_of_parse_cb(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+ struct pf8x00_regulator *data = desc_to_regulator(desc);
+ struct pf8x00_chip *chip = config->driver_data;
+ int phase;
+ int val;
+ int ret;
+
+ ret = of_property_read_u32(np, "nxp,ilim-ma", &val);
+ if (ret)
+ dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use 2100 mA\n",
+ desc->id - PF8X00_LDO4);
+
+ swxilim_select(desc, val);
+
+ ret = of_property_read_u32(np, "nxp,phase-shift", &val);
+ if (ret) {
+ dev_dbg(chip->dev,
+ "unspecified phase-shift for BUCK%d, use 0 degrees\n",
+ desc->id - PF8X00_LDO4);
+ val = PF8X00_SWXPHASE_DEFAULT;
+ }
+
+ phase = val / 45;
+ if ((phase * 45) != val) {
+ dev_warn(config->dev,
+ "invalid phase_shift %d for BUCK%d, use 0 degrees\n",
+ (phase * 45), desc->id - PF8X00_LDO4);
+ phase = PF8X00_SWXPHASE_SHIFT;
+ }
+
+ data->phase_shift = (phase >= 1) ? phase - 1 : PF8X00_SWXPHASE_SHIFT;
+
+ return 0;
+}
+
+static const struct regulator_ops pf8x00_ldo_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops pf8x00_buck_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops pf8x00_vsnvs_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+#define PF8X00LDO(_id, _name, base, voltages) \
+ [PF8X00_LDO ## _id] = { \
+ .desc = { \
+ .name = _name, \
+ .of_match = _name, \
+ .regulators_node = "regulators", \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pf8x00_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PF8X00_LDO ## _id, \
+ .owner = THIS_MODULE, \
+ .volt_table = voltages, \
+ .vsel_reg = (base) + LDO_RUN_VOLT, \
+ .vsel_mask = 0xff, \
+ .enable_reg = (base) + LDO_CONFIG2, \
+ .enable_val = 0x2, \
+ .disable_val = 0x0, \
+ .enable_mask = 2, \
+ }, \
+ }
+
+#define PF8X00BUCK(_id, _name, base, voltages) \
+ [PF8X00_BUCK ## _id] = { \
+ .desc = { \
+ .name = _name, \
+ .of_match = _name, \
+ .regulators_node = "regulators", \
+ .of_parse_cb = pf8x00_of_parse_cb, \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pf8x00_buck_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PF8X00_BUCK ## _id, \
+ .owner = THIS_MODULE, \
+ .volt_table = voltages, \
+ .vsel_reg = (base) + SW_RUN_VOLT, \
+ .vsel_mask = 0xff, \
+ .enable_reg = (base) + SW_MODE1, \
+ .enable_val = 0x3, \
+ .disable_val = 0x0, \
+ .enable_mask = 0x3, \
+ .enable_time = 500, \
+ }, \
+ }
+
+#define PF8X00VSNVS(_name, base, voltages) \
+ [PF8X00_VSNVS] = { \
+ .desc = { \
+ .name = _name, \
+ .of_match = _name, \
+ .regulators_node = "regulators", \
+ .n_voltages = ARRAY_SIZE(voltages), \
+ .ops = &pf8x00_vsnvs_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = PF8X00_VSNVS, \
+ .owner = THIS_MODULE, \
+ .volt_table = voltages, \
+ .vsel_reg = (base), \
+ .vsel_mask = 0x3, \
+ }, \
+ }
+
+static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
+ PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages),
+ PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages),
+ PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages),
+ PF8X00LDO(4, "ldo4", PF8X00_LDO_BASE(PF8X00_LDO4), pf8x00_ldo_voltages),
+ PF8X00BUCK(1, "buck1", PF8X00_SW_BASE(PF8X00_BUCK1), pf8x00_sw1_to_6_voltages),
+ PF8X00BUCK(2, "buck2", PF8X00_SW_BASE(PF8X00_BUCK2), pf8x00_sw1_to_6_voltages),
+ PF8X00BUCK(3, "buck3", PF8X00_SW_BASE(PF8X00_BUCK3), pf8x00_sw1_to_6_voltages),
+ PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages),
+ PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages),
+ PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages),
+ PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
+ PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages),
+};
+
+static int pf8x00_identify(struct pf8x00_chip *chip)
+{
+ unsigned int value;
+ u8 dev_fam, dev_id;
+ const char *name = NULL;
+ int ret;
+
+ ret = regmap_read(chip->regmap, PF8X00_DEVICEID, &value);
+ if (ret) {
+ dev_err(chip->dev, "failed to read chip family\n");
+ return ret;
+ }
+
+ dev_fam = value & PF8X00_DEVICE_FAM_MASK;
+ switch (dev_fam) {
+ case PF8X00_FAM:
+ break;
+ default:
+ dev_err(chip->dev,
+ "Chip 0x%x is not from PF8X00 family\n", dev_fam);
+ return ret;
+ }
+
+ dev_id = value & PF8X00_DEVICE_ID_MASK;
+ switch (dev_id) {
+ case PF8100:
+ name = "PF8100";
+ break;
+ case PF8121A:
+ name = "PF8121A";
+ break;
+ case PF8200:
+ name = "PF8100";
+ break;
+ default:
+ dev_err(chip->dev, "Unknown pf8x00 device id 0x%x\n", dev_id);
+ return -ENODEV;
+ }
+
+ dev_info(chip->dev, "%s PMIC found.\n", name);
+
+ return 0;
+}
+
+static int pf8x00_i2c_probe(struct i2c_client *client)
+{
+ struct regulator_config config = { NULL, };
+ struct pf8x00_chip *chip;
+ int id;
+ int ret;
+
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, chip);
+ chip->dev = &client->dev;
+
+ chip->regmap = devm_regmap_init_i2c(client, &pf8x00_regmap_config);
+ if (IS_ERR(chip->regmap)) {
+ ret = PTR_ERR(chip->regmap);
+ dev_err(&client->dev,
+ "regmap allocation failed with err %d\n", ret);
+ return ret;
+ }
+
+ ret = pf8x00_identify(chip);
+ if (ret)
+ return ret;
+
+ for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) {
+ struct pf8x00_regulator *data = &pf8x00_regulators_data[id];
+ struct regulator_dev *rdev;
+
+ config.dev = chip->dev;
+ config.driver_data = chip;
+ config.regmap = chip->regmap;
+
+ rdev = devm_regulator_register(&client->dev, &data->desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&client->dev,
+ "failed to register %s regulator\n", data->desc.name);
+ return PTR_ERR(rdev);
+ }
+
+ if ((id >= PF8X00_BUCK1) && (id <= PF8X00_BUCK7)) {
+ u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2;
+
+ regmap_update_bits(chip->regmap, reg,
+ PF8X00_SWXPHASE_MASK,
+ data->phase_shift);
+
+ regmap_update_bits(chip->regmap, reg,
+ PF8X00_SWXILIM_MASK,
+ data->ilim << PF8X00_SWXILIM_SHIFT);
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id pf8x00_dt_ids[] = {
+ { .compatible = "nxp,pf8x00",},
+ { }
+};
+MODULE_DEVICE_TABLE(of, pf8x00_dt_ids);
+
+static const struct i2c_device_id pf8x00_i2c_id[] = {
+ { "pf8x00", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, pf8x00_i2c_id);
+
+static struct i2c_driver pf8x00_regulator_driver = {
+ .id_table = pf8x00_i2c_id,
+ .driver = {
+ .name = "pf8x00",
+ .of_match_table = pf8x00_dt_ids,
+ },
+ .probe_new = pf8x00_i2c_probe,
+};
+module_i2c_driver(pf8x00_regulator_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Regulator Driver for NXP's PF8100/PF8121A/PF8200 PMIC");
+MODULE_LICENSE("GPL v2");
--
2.25.1
