From: Rafał Miłecki <rafal@xxxxxxxxxx> BCM4908 uses external MISC block for controlling PERST# signal. Use it as a reset controller. Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx> --- V2: Reorder BCM4908 in the enum pcie_type Use devm_reset_control_get_optional_exclusive() Don't move hw_rev read up in the code --- drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pcie-brcmstb.c | 32 +++++++++++++++++++++++++++ 2 files changed, 33 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 64e2f5e379aa..d44c70bb88f6 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -273,7 +273,7 @@ config VMD config PCIE_BRCMSTB tristate "Broadcom Brcmstb PCIe host controller" - depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST + depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || COMPILE_TEST depends on OF depends on PCI_MSI_IRQ_DOMAIN default ARCH_BRCMSTB diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 9c3d2982248d..98536cf3af58 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -96,6 +96,7 @@ #define PCIE_MISC_REVISION 0x406c #define BRCM_PCIE_HW_REV_33 0x0303 +#define BRCM_PCIE_HW_REV_3_20 0x0320 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000 @@ -190,6 +191,7 @@ struct brcm_pcie; static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val); static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val); +static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val); static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val); static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val); @@ -206,6 +208,7 @@ enum { enum pcie_type { GENERIC, + BCM4908, BCM7278, BCM2711, }; @@ -230,6 +233,13 @@ static const struct pcie_cfg_data generic_cfg = { .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, }; +static const struct pcie_cfg_data bcm4908_cfg = { + .offsets = pcie_offsets, + .type = BCM4908, + .perst_set = brcm_pcie_perst_set_4908, + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, +}; + static const int pcie_offset_bcm7278[] = { [RGR1_SW_INIT_1] = 0xc010, [EXT_CFG_INDEX] = 0x9000, @@ -282,6 +292,7 @@ struct brcm_pcie { const int *reg_offsets; enum pcie_type type; struct reset_control *rescal; + struct reset_control *perst_reset; int num_memc; u64 memc_size[PCIE_BRCM_MAX_MEMC]; u32 hw_rev; @@ -747,6 +758,17 @@ static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie)); } +static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val) +{ + if (WARN_ONCE(!pcie->perst_reset, "missing PERST# reset controller\n")) + return; + + if (val) + reset_control_assert(pcie->perst_reset); + else + reset_control_deassert(pcie->perst_reset); +} + static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val) { u32 tmp; @@ -1206,6 +1228,7 @@ static int brcm_pcie_remove(struct platform_device *pdev) static const struct of_device_id brcm_pcie_match[] = { { .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg }, + { .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg }, { .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg }, { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg }, { .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg }, @@ -1262,6 +1285,11 @@ static int brcm_pcie_probe(struct platform_device *pdev) clk_disable_unprepare(pcie->clk); return PTR_ERR(pcie->rescal); } + pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst"); + if (IS_ERR(pcie->perst_reset)) { + clk_disable_unprepare(pcie->clk); + return PTR_ERR(pcie->perst_reset); + } ret = reset_control_deassert(pcie->rescal); if (ret) @@ -1279,6 +1307,10 @@ static int brcm_pcie_probe(struct platform_device *pdev) goto fail; pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION); + if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) { + dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n"); + goto fail; + } msi_np = of_parse_phandle(pcie->np, "msi-parent", 0); if (pci_msi_enabled() && msi_np == pcie->np) { -- 2.26.2