Re: [RESEND PATCH 06/19] arm64: allwinner: a100: Add device node for DMA controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/11/2020 06:29, Frank Lee wrote:
> From: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
> 
> The A100 SoC has a DMA controller that supports 8 DMA channels
> to and from various peripherals.
> 
> Add a device node for it.
> 
> Signed-off-by: Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> index cc321c04f121..c34ed8045363 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> @@ -101,6 +101,18 @@ ccu: clock@3001000 {
>  			#reset-cells = <1>;
>  		};
>  
> +		dma: dma-controller@3002000 {
> +			compatible = "allwinner,sun50i-a100-dma";

So at it appears to work with the exact same settings in the driver as
the H6, we should have that as a compatible fallback:
  compatible = "allwinner,sun50i-a100-dma", "allwinner,sun50i-h6-dma";

Cheers,
Andre

> +			reg = <0x03002000 0x1000>;
> +			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
> +			clock-names = "bus", "mbus";
> +			dma-channels = <8>;
> +			dma-requests = <51>;
> +			resets = <&ccu RST_BUS_DMA>;
> +			#dma-cells = <1>;
> +		};
> +
>  		gic: interrupt-controller@3021000 {
>  			compatible = "arm,gic-400";
>  			reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux