On Fri, Nov 20, 2020 at 01:56:11AM +0200, Cristian Ciocaltea wrote:
> Add pinctrl definitions for the I2C controllers used in RoseapplePi SBC.
> For the moment enable only I2C0, which is used by the ATC2603C PMIC.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
Earlier we used to add "_default" suffix for the pin groups to
differentiate between active and sleep states. But I guess we can just
keep the suffix away until we hit usecase.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Thanks,
Mani
> ---
> arch/arm/boot/dts/owl-s500-roseapplepi.dts | 44 ++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> index fe9ae3619422..ff91561ca99c 100644
> --- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> @@ -37,7 +37,51 @@ sd_vcc: sd-vcc {
> };
> };
>
> +&i2c0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> +};
> +
> +&i2c1 {
> + status = "disabled";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> +};
> +
> +&i2c2 {
> + status = "disabled";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pins>;
> +};
> +
> &pinctrl {
> + i2c0_pins: i2c0-pins {
> + pinmux {
> + groups = "i2c0_mfp";
> + function = "i2c0";
> + };
> +
> + pinconf {
> + pins = "i2c0_sclk", "i2c0_sdata";
> + bias-pull-up;
> + };
> + };
> +
> + i2c1_pins: i2c1-pins {
> + pinconf {
> + pins = "i2c1_sclk", "i2c1_sdata";
> + bias-pull-up;
> + };
> + };
> +
> + i2c2_pins: i2c2-pins {
> + pinconf {
> + pins = "i2c2_sclk", "i2c2_sdata";
> + bias-pull-up;
> + };
> + };
> +
> mmc0_pins: mmc0-pins {
> pinmux {
> groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
> --
> 2.29.2
>
