There are couple of places where INTA interrupt controller lacks #interrupt-cells property. This leads to warnings of the type: arch/arm64/boot/dts/ti/k3-j721e-main.dtsi:147.51-156.5: Warning (interrupt_provider): /bus@100000/main-navss/interrupt-controller@33d00000: Missing #interrupt-cells in interrupt provider when building TI device-tree files with W=2 warning level. Fix these. Reviewed-by: Grygorii Strashko <grygorii.strashko@xxxxxx> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx> --- v2: - Add Grygorii's Reviewed-by: arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 1 + arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 3eeb6e9876db..aa8725db0187 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -473,6 +473,7 @@ interrupt-controller; interrupt-parent = <&intr_main_navss>; msi-controller; + #interrupt-cells = <0>; ti,sci = <&dmsc>; ti,sci-dev-id = <179>; ti,interrupt-ranges = <0 0 256>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index e2a96b2c423c..ffedd9531362 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -148,6 +148,7 @@ interrupt-controller; interrupt-parent = <&main_navss_intr>; msi-controller; + #interrupt-cells = <0>; ti,sci = <&dmsc>; ti,sci-dev-id = <209>; ti,interrupt-ranges = <0 0 256>; -- 2.17.1
