From: Rafał Miłecki <rafal@xxxxxxxxxx> BCM4908 was built using older PCIe hardware block that requires using external reset block controlling PERST# signals. Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx> --- .../reset/brcm,bcm4908-misc-pcie-reset.yaml | 39 +++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml new file mode 100644 index 000000000000..88aebb370838 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom MISC block PCIe reset controller + +description: This document describes reset controller handling PCIe PERST# + signals. On BCM4908 it's a part of the MISC block. + +maintainers: + - Rafał Miłecki <rafal@xxxxxxxxxx> + +properties: + compatible: + const: brcm,bcm4908-misc-pcie-reset + + reg: + maxItems: 1 + + "#reset-cells": + description: PCIe core id + const: 1 + +required: + - compatible + - reg + - "#reset-cells" + +additionalProperties: false + +examples: + - | + reset-controller@ff802644 { + compatible = "brcm,bcm4908-misc-pcie-reset"; + reg = <0xff802644 0x04>; + #reset-cells = <1>; + }; -- 2.26.2
