From: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
Add dsi and mipitx nodes to the MT8183.
Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 31 ++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 7839480df075..da7212e21fdf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -892,10 +892,27 @@ mmc1: mmc@11240000 {
status = "disabled";
};
+ mipi_tx0: mipi-dphy@11e50000 {
+ compatible = "mediatek,mt8183-mipi-tx";
+ reg = <0 0x11e50000 0 0x1000>;
+ clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
+ clock-names = "ref_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "mipi_tx0_pll";
+ nvmem-cells = <&mipi_tx_calibration>;
+ nvmem-cell-names = "calibration-data";
+ };
+
efuse: efuse@11f10000 {
compatible = "mediatek,mt8183-efuse",
"mediatek,efuse";
reg = <0 0x11f10000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ mipi_tx_calibration: calib@190 {
+ reg = <0x190 0xc>;
+ };
};
u3phy: usb-phy@11f40000 {
@@ -937,6 +954,20 @@ mmsys: syscon@14000000 {
#clock-cells = <1>;
};
+ dsi0: dsi@14014000 {
+ compatible = "mediatek,mt8183-dsi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ mediatek,syscon-dsi = <&mmsys 0x140>;
+ clocks = <&mmsys CLK_MM_DSI0_MM>,
+ <&mmsys CLK_MM_DSI0_IF>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ };
+
smi_common: smi@14019000 {
compatible = "mediatek,mt8183-smi-common", "syscon";
reg = <0 0x14019000 0 0x1000>;
--
2.29.2
