Fix the leds subnode names to match (^led-[0-9a-f]$|led).
Similar change has been also done by commit 9a19a39ee48b ("arm64: dts:
zynqmp: Fix leds subnode name for zcu100/ultra96 v1").
The patch is fixing these warnings:
.../zynq-zc702.dt.yaml: leds: 'ds23' does not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml
.../zynq-zybo-z7.dt.yaml: gpio-leds: 'ld4' does not match any of the
regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml
Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---
arch/arm/boot/dts/zynq-zc702.dts | 2 +-
arch/arm/boot/dts/zynq-zybo-z7.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 27cd6cb52f1b..10a7d0b8cf8b 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -49,7 +49,7 @@ sw13 {
leds {
compatible = "gpio-leds";
- ds23 {
+ led-ds23 {
label = "ds23";
gpios = <&gpio0 10 0>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts
index 357b78a5c11b..7b87e10d3953 100644
--- a/arch/arm/boot/dts/zynq-zybo-z7.dts
+++ b/arch/arm/boot/dts/zynq-zybo-z7.dts
@@ -25,7 +25,7 @@ chosen {
gpio-leds {
compatible = "gpio-leds";
- ld4 {
+ led-ld4 {
label = "zynq-zybo-z7:green:ld4";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
--
2.29.2
