Add YAML DT binding documentation for the SiFive FU740 PRCI. The
link of unmatched board as follow, the U740-C000 manual would be present
in the same page later.
https://www.sifive.com/boards/hifive-unmatched
Passes dt_binding_check.
Signed-off-by: Zong Li <zong.li@xxxxxxxxxx>
---
.../bindings/clock/sifive/fu740-prci.yaml | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
new file mode 100644
index 000000000000..e17143cac316
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu740-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+ - Zong Li <zong.li@xxxxxxxxxx>
+ - Paul Walmsley <paul.walmsley@xxxxxxxxxx>
+
+description:
+ On the FU740 family of SoCs, most system-wide clock and reset integration
+ is via the PRCI IP block.
+ The clock consumer should specify the desired clock via the clock ID
+ macros defined in include/dt-bindings/clock/sifive-fu740-prci.h.
+ These macros begin with PRCI_CLK_.
+
+ The hfclk and rtcclk nodes are required, and represent physical
+ crystals or resonators located on the PCB. These nodes should be present
+ underneath /, rather than /soc.
+
+properties:
+ compatible:
+ const: sifive,fu740-c000-prci
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: high frequency clock.
+ - description: RTL clock.
+
+ clock-names:
+ items:
+ - const: hfclk
+ - const: rtcclk
+
+ "#clock-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ prci: clock-controller@10000000 {
+ compatible = "sifive,fu740-c000-prci";
+ reg = <0x10000000 0x1000>;
+ clocks = <&hfclk>, <&rtcclk>;
+ #clock-cells = <1>;
+ };
--
2.29.2
