The PMIC throws an errors because the clock isn't assigned to it.
Fix this by assigning the clocks info.
Fixes: acb01032e11a ("arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC")
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 9bdefbba9e90..d897913537ca 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -111,6 +111,10 @@ pmic@4b {
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
regulators {
buck1_reg: BUCK1 {
regulator-name = "buck1";
--
2.25.1
