On Wed, Nov 25, 2020 at 03:07:44PM +0800, Shihlun Lin wrote:
> This is one of sub-device driver for Advantech embedded controller
> AHC1EC0. This driver provide watchdog functionality for Advantech
> related applications to restart the system.
>
> Signed-off-by: Shihlun Lin <shihlun.lin@xxxxxxxxxxxxxxxx>
New watchdog drivers must use the watchdog API to register
the watchdog device.
> ---
> drivers/watchdog/Kconfig | 8 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/ahc1ec0-wdt.c | 489 +++++++++++++++++++++++++++++++++
> 3 files changed, 498 insertions(+)
> create mode 100644 drivers/watchdog/ahc1ec0-wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index fd7968635e6d..82084e5af35e 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1634,6 +1634,14 @@ config NIC7018_WDT
> To compile this driver as a module, choose M here: the module will be
> called nic7018_wdt.
>
> +config AHC1EC0_WDT
> + tristate "Advantech EC Watchdog Function"
> + depends on MFD_AHC1EC0
> + help
> + This is sub-device for Advantech embedded controller AHC1EC0. This
> + driver provide watchdog functionality for Advantech related
> + applications to restart the system.
> +
> # M68K Architecture
>
> config M54xx_WATCHDOG
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 071a2e50be98..93d15eed1f7c 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -145,6 +145,7 @@ obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o
> obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
> obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
> obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
> +obj-$(CONFIG_AHC1EC0_WDT) += ahc1ec0-wdt.o
> obj-$(CONFIG_MLX_WDT) += mlx_wdt.o
>
> # M68K Architecture
> diff --git a/drivers/watchdog/ahc1ec0-wdt.c b/drivers/watchdog/ahc1ec0-wdt.c
> new file mode 100644
> index 000000000000..3799b99f6423
> --- /dev/null
> +++ b/drivers/watchdog/ahc1ec0-wdt.c
> @@ -0,0 +1,489 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Watchdog Driver for Advantech controlling EC chip AHC1EC0
> + *
> + * Copyright (C) 2020, Advantech Automation Corp.
> + *
> + * Change Log:
> + * Version 1.00 <10/10/2014> Sun.Lang
> + * - Initial version
> + * Version 1.01 <12/30/2015> Jiangwei.Zhu
> + * - Modify adv_watchdog_init function to install the driver to
> + * - the support devices.
> + * Version 1.02 <03/04/2016> Jiangwei.Zhu
> + * - Support UNO-1372G-E3AE, TPC-1782H-433AE, APAX-5580-433AE
> + * Version 1.03 <05/09/2016> Ji.Xu
> + * - Support EC watchdog mini-board on UNO-3083G/3085G-D44E/D64E
> + * - APAX-5580-473AE/4C3AE.
> + * - Modify the timeout unit to 1 second.
> + * - Modify the device name check method to fuzzy matching.
> + * Version 1.04 <06/28/2017> Ji.Xu
> + * - Support EC UNO-2271G-E2xAE.
> + * - Support EC UNO-2271G-E02xAE.
> + * - Support EC UNO-2473G-JxAE.
> + * - Support proc filesystem.
> + * Version 1.05 <09/20/2017> Ji.Xu
> + * - Support EC UNO-2484G-633xAE.
> + * - Support EC UNO-2484G-653xAE.
> + * - Support EC UNO-2484G-673xAE.
> + * - Support EC UNO-2484G-733xAE.
> + * - Support EC UNO-2484G-753xAE.
> + * - Support EC UNO-2484G-773xAE.
> + * Version 1.06 <10/26/2017> Ji.Xu
> + * - Support EC UNO-3283G-674AE
> + * - Support EC UNO-3285G-674AE
> + * Version 1.07 <11/16/2017> Zhang.Yang
> + * - Support EC UNO-1372G-J021AE/J031AE
> + * - Support EC UNO-2372G
> + * Version 1.08 <02/02/2018> Ji.Xu
> + * - Support EC TPC-B500-6??AE
> + * - Support EC TPC-5???T-6??AE
> + * - Support EC TPC-5???W-6??AE
> + * Version 1.09 <03/20/2018> Ji.Xu
> + * - Support for compiling in kernel-4.10 and below.
> + * Version 1.10 <02/20/2019> Ji.Xu
> + * - Support EC UNO-420
> + * - Support EC TPC-B200-???AE
> + * - Support EC TPC-2???T-???AE
> + * - Support EC TPC-2???W-???AE
> + * Version 1.11 <08/30/2019> Yao.Kang
> + * - Support 32-bit programs on 64-bit kernel
> + * Version 1.12 <12/03/2019> Jianfeng.dai
> + * - Support support UNO-2372G watchdog
> + * Version 1.13 <04/24/2020> Yao.Kang
> + * - Support support UNO-2473G
> + */
> +
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/miscdevice.h>
> +#include <linux/watchdog.h>
> +#include <linux/ioport.h>
> +#include <linux/fcntl.h>
> +#include <linux/version.h>
> +#include <linux/ioctl.h>
> +#include <linux/io.h>
> +#include <linux/uaccess.h>
> +#include <linux/uaccess.h>
> +#include <asm/switch_to.h>
> +#include <linux/platform_device.h>
> +#include <linux/notifier.h>
> +#include <linux/reboot.h>
> +#include <linux/init.h>
> +#include <linux/delay.h>
> +#include <linux/fs.h>
> +#include <linux/mfd/ahc1ec0.h>
> +#include <linux/seq_file.h>
> +#include <linux/proc_fs.h>
I don't think this large list of include files is needed.
> +
> +#define ADVANTECH_EC_WDT_VER "1.12"
> +#define ADVANTECH_EC_WDT_DATE "04/24/2020"
> +
> +#define PROCFS_MAX_SIZE 128
> +
> +static char adv_expect_close;
> +static unsigned long advwdt_is_open;
> +static unsigned short timeout = 450;
> +static unsigned int major;
> +struct mutex lock_ioctl;
> +
> +struct adv_wdt_info {
> + unsigned char chip_name[32];
> + unsigned char is_enable[8];
> + unsigned long current_timeout;
> +};
> +
> +static struct adv_wdt_info wdt_data = {
> + .chip_name = "Advantech Embedded Controller",
> + .is_enable = "No",
> + .current_timeout = 45,
> +};
> +
> +static int wdt_proc_read(struct seq_file *m, void *p);
> +
> +static void *c_start(struct seq_file *m, loff_t *pos)
> +{
> + return *pos < 1 ? (void *)1 : NULL;
> +}
> +
> +static void *c_next(struct seq_file *m, void *v, loff_t *pos)
> +{
> + ++*pos;
> + return NULL;
> +}
> +
> +static void c_stop(struct seq_file *m, void *v)
> +{
> + /*nothing to do*/
> +}
> +
> +static int c_show(struct seq_file *m, void *p)
> +{
> + wdt_proc_read(m, p);
> + return 0;
> +}
> +
> +static const struct seq_operations proc_seq_ops = {
> + .show = c_show,
> + .start = c_start,
> + .next = c_next,
> + .stop = c_stop
> +};
> +
> +static int wdt_proc_open(struct inode *inode, struct file *file)
> +{
> + int ret;
> + struct seq_file *m;
> +
> + ret = seq_open(file, &proc_seq_ops);
> + m = file->private_data;
> + m->private = file->f_path.dentry->d_iname;
> +
> + return ret;
> +}
> +
> +static int wdt_proc_read(struct seq_file *m, void *p)
> +{
> + unsigned char *chip_name, *is_enable;
> + unsigned long current_timeout = 0;
> +
> + chip_name = wdt_data.chip_name;
> + current_timeout = wdt_data.current_timeout;
> + is_enable = wdt_data.is_enable;
> +
> + seq_printf(m, "name : %s\n", chip_name);
> + seq_printf(m, "timeout : %ld\n", current_timeout);
> + seq_printf(m, "is_enable : %s\n", is_enable);
> +
> + return 0;
> +}
> +
> +static const struct proc_ops fops = {
> + .proc_open = wdt_proc_open,
> + .proc_read = seq_read,
> +};
> +
> +static int wdt_create_proc(char *name)
> +{
> + struct proc_dir_entry *wdt_proc_entries;
> + unsigned char proc_name[64] = {0};
> +
> + sprintf(proc_name, "%s", name);
> +
> + wdt_proc_entries = proc_create(proc_name, 0644, NULL, &fops);
> + if (wdt_proc_entries == NULL) {
> + remove_proc_entry(proc_name, NULL);
> + pr_err("Error: Could not initialize /proc/%s", proc_name);
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
I don't see the point of adding proc file system nodes for a watchdog driver.
> +static void wdt_remove_proc(char *name)
> +{
> + unsigned char proc_name[64] = {0};
> +
> + sprintf(proc_name, "%s", name);
> + remove_proc_entry(proc_name, NULL);
> +}
> +
> +static int set_delay(unsigned short delay_timeout)
> +{
> + if (write_hw_ram(EC_RESET_DELAY_TIME_L, delay_timeout & 0x00FF)) {
> + pr_err("Failed to set Watchdog Retset Time Low byte.");
> + return -EINVAL;
> + }
> +
> + if (write_hw_ram(EC_RESET_DELAY_TIME_H, (delay_timeout & 0xFF00) >> 8)) {
> + pr_err("Failed to set Watchdog Retset Time Hight byte.");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int advwdt_set_heartbeat(unsigned long t)
> +{
> + if (t < 1 || t > 6553)
> + return -EINVAL;
> +
> + timeout = (t * 10);
> +
> + return 0;
> +}
> +
> +static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> +{
> + unsigned long new_timeout;
> + void __user *argp = (void __user *)arg;
> + int __user *p = argp;
> + int options;
> + static struct watchdog_info ident = {
> + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
> + .firmware_version = 0,
> + .identity = "Advantech WDT"
> + };
> +
> + mutex_lock(&lock_ioctl);
> + if (advwdt_is_open < 1) {
> + pr_err("watchdog does not open.");
> + mutex_unlock(&lock_ioctl);
> + return -1;
> + }
> +
> + switch (cmd) {
> + case WDIOC_GETSUPPORT:
> + if (copy_to_user(argp, &ident, sizeof(ident))) {
> + mutex_unlock(&lock_ioctl);
> + return -EFAULT;
> + }
> + break;
> +
> + case WDIOC_GETSTATUS:
> + case WDIOC_GETBOOTSTATUS:
> + mutex_unlock(&lock_ioctl);
> + return put_user(0, p);
> +
> + case WDIOC_KEEPALIVE:
> + if (write_hwram_command(EC_WDT_RESET)) {
> + pr_err("Failed to set Watchdog reset.");
> + return -EINVAL;
> + }
> + break;
> +
> + case WDIOC_SETTIMEOUT:
> + if (get_user(new_timeout, (unsigned long *)arg)) {
> + mutex_unlock(&lock_ioctl);
> + return -EFAULT;
> + }
> +
> + if (advwdt_set_heartbeat(new_timeout)) {
> + pr_err("Advantch WDT: the input timeout is out of range.");
> + pr_err("Please choose valid data between 1 ~ 6553.");
> + mutex_unlock(&lock_ioctl);
> + return -EINVAL;
> + }
> +
> + if (set_delay((unsigned short)(timeout - 1))) {
> + pr_err("Failed to set Watchdog delay.");
> + return -EINVAL;
> + }
> +
> + if (write_hwram_command(EC_WDT_START)) {
> + pr_err("Failed to set Watchdog start.");
> + return -EINVAL;
> + }
> +
> + wdt_data.is_enable[0] = 'Y';
> + wdt_data.is_enable[1] = 'e';
> + wdt_data.is_enable[2] = 's';
> + wdt_data.current_timeout = timeout / 10;
> + break;
> +
> + case WDIOC_GETTIMEOUT:
> + if (timeout == 0) {
> + mutex_unlock(&lock_ioctl);
> + return -EFAULT;
> + }
> + mutex_unlock(&lock_ioctl);
> +
> + return put_user(timeout / 10, (unsigned long *)arg);
> +
> + case WDIOC_SETOPTIONS:
> + if (get_user(options, p)) {
> + mutex_unlock(&lock_ioctl);
> + return -EFAULT;
> + }
> +
> + if (options & WDIOS_DISABLECARD) {
> + if (write_hwram_command(EC_WDT_STOP)) {
> + pr_err("Failed to set Watchdog stop.");
> + return -EINVAL;
> + }
> +
> + wdt_data.is_enable[0] = 'N';
> + wdt_data.is_enable[1] = 'o';
> + wdt_data.is_enable[2] = '\0';
> + }
> +
> + if (options & WDIOS_ENABLECARD) {
> + if (write_hwram_command(EC_WDT_STOP)) {
> + pr_err("Failed to set Watchdog stop");
> + return -EINVAL;
> + }
> +
> + if (set_delay((unsigned short)(timeout-1))) {
> + pr_err("Failed to set Watchdog delay.");
> + return -EINVAL;
> + }
> +
> + if (write_hwram_command(EC_WDT_START)) {
> + pr_err("Failed to set Watchdog start.");
> + return -EINVAL;
> + }
> +
> + wdt_data.is_enable[0] = 'Y';
> + wdt_data.is_enable[1] = 'e';
> + wdt_data.is_enable[2] = 's';
> + }
> + mutex_unlock(&lock_ioctl);
> +
> + return 0;
> +
> + default:
> + mutex_unlock(&lock_ioctl);
> + return -ENOTTY;
> + }
> +
> + mutex_unlock(&lock_ioctl);
> + return 0;
> +}
> +
> +static int advwdt_open(struct inode *inode, struct file *file)
> +{
> + if (test_and_set_bit(0, &advwdt_is_open))
> + return -EBUSY;
> +
> + if (write_hwram_command(EC_WDT_STOP)) {
> + pr_err("Failed to set Watchdog stop.");
> + return -EINVAL;
> + }
> + wdt_data.is_enable[0] = 'N';
> + wdt_data.is_enable[1] = 'o';
> + wdt_data.is_enable[2] = '\0';
> + return 0;
> +}
> +
> +static int advwdt_close(struct inode *inode, struct file *file)
> +{
> + clear_bit(0, &advwdt_is_open);
> + adv_expect_close = 0;
> +
> + return 0;
> +}
> +
> +/* Notifier for system down */
> +static int advwdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
> +{
> + if (code == SYS_DOWN || code == SYS_HALT) {
> + /* Turn the WDT off */
> + if (write_hwram_command(EC_WDT_STOP)) {
> + pr_err("Failed to set Watchdog stop.");
> + return -EINVAL;
> + }
> + wdt_data.is_enable[0] = 'N';
> + wdt_data.is_enable[1] = 'o';
> + wdt_data.is_enable[2] = '\0';
> + pr_info("%s: notify sys shutdown", __func__);
> + }
> +
> + return NOTIFY_DONE;
> +}
> +
> +/* Kernel Interfaces */
> +static const struct file_operations advwdt_fops = {
> + .owner = THIS_MODULE,
> + .unlocked_ioctl = advwdt_ioctl,
> + .compat_ioctl = advwdt_ioctl,
> + .open = advwdt_open,
> + .release = advwdt_close,
> +};
> +
> +/*
> + * The WDT needs to learn about soft shutdowns in order to
> + * turn the timebomb registers off.
> + */
> +static struct notifier_block advwdt_notifier = {
> + advwdt_notify_sys,
> + NULL,
> + 0
> +};
> +
> +static struct class *adv_ec_class;
> +static dev_t devno;
> +
> +static int adv_ec_wdt_probe(struct platform_device *pdev)
> +{
> + struct device *dev;
> +
> + mutex_init(&lock_ioctl);
> +
> + major = register_chrdev(0, "adv_watchdog", &advwdt_fops);
> + if (major < 0) {
> + pr_err("Advwdt register chrdev failed!");
> + return major;
> + }
> + devno = MKDEV(major, 0);
> + register_reboot_notifier(&advwdt_notifier);
> +
> + /* Create /dev/watchdog for userspace access */
> + adv_ec_class = class_create(THIS_MODULE, "adv_watchdog");
> + if (IS_ERR(adv_ec_class)) {
> + pr_err("%s: can't create class", __func__);
> + unregister_chrdev_region(devno, 1);
> + return -1;
> + }
> +
> + dev = device_create(adv_ec_class, NULL, devno, NULL, "watchdog");
> + if (IS_ERR(dev)) {
> + pr_err("%s: can't create device watchdog", __func__);
> + unregister_chrdev_region(devno, 1);
> + class_destroy(adv_ec_class);
> + return -1;
> + }
> +
> + wdt_create_proc("advwdtinfo");
> + wdt_data.current_timeout = timeout / 10;
> + wdt_data.is_enable[0] = 'N';
> + wdt_data.is_enable[1] = 'o';
> + wdt_data.is_enable[2] = '\0';
> +
> + dev_info(&pdev->dev, "Ver:%s, Data:%s, probe done",
> + ADVANTECH_EC_WDT_VER, ADVANTECH_EC_WDT_DATE);
> +
> + return 0;
> +}
> +
> +static int adv_ec_wdt_remove(struct platform_device *pdev)
> +{
> + int ret;
> +
> + ret = write_hwram_command(EC_WDT_STOP);
> + if (ret) {
> + pr_err("Failed to set Watchdog stop.");
> + return ret;
> + }
> +
> + wdt_data.is_enable[0] = 'N';
> + wdt_data.is_enable[1] = 'o';
> + wdt_data.is_enable[2] = '\0';
> + clear_bit(0, &advwdt_is_open);
> + adv_expect_close = 0;
> + pr_info("Driver uninstall, set Watchdog stop.");
> +
> + device_destroy(adv_ec_class, devno);
> + unregister_chrdev_region(devno, 1);
> + class_destroy(adv_ec_class);
> +
> + unregister_reboot_notifier(&advwdt_notifier);
> + unregister_chrdev(major, "adv_watchdog");
> +
> + wdt_remove_proc("advwdtinfo");
> +
> + return 0;
> +}
> +
> +static struct platform_driver adv_wdt_drv = {
> + .driver = {
> + .name = "adv-ec-wdt",
> + },
> + .probe = adv_ec_wdt_probe,
> + .remove = adv_ec_wdt_remove,
> +};
> +module_platform_driver(adv_wdt_drv);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Advantech EC Watchdog Driver.");
> --
> 2.17.1
>
