On 15-11-20, 18:12, Jonathan McDowell wrote: > Converts the device tree bindings for the Qualcomm Application Data > Mover (ADM) DMA controller over to YAML schemas. Rob ? > > Signed-off-by: Jonathan McDowell <noodles@xxxxxxxx> > --- > .../devicetree/bindings/dma/qcom,adm.yaml | 102 ++++++++++++++++++ > .../devicetree/bindings/dma/qcom_adm.txt | 61 ----------- > 2 files changed, 102 insertions(+), 61 deletions(-) > create mode 100644 Documentation/devicetree/bindings/dma/qcom,adm.yaml > delete mode 100644 Documentation/devicetree/bindings/dma/qcom_adm.txt > > diff --git a/Documentation/devicetree/bindings/dma/qcom,adm.yaml b/Documentation/devicetree/bindings/dma/qcom,adm.yaml > new file mode 100644 > index 000000000000..353d85d3326d > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/qcom,adm.yaml > @@ -0,0 +1,102 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dma/qcom,adm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: QCOM ADM DMA Controller > + > +maintainers: > + - Jonathan McDowell <noodles@xxxxxxxx> > + > +description: | > + QCOM Application Data Mover (ADM) DMA controller found in the MSM8x60 > + and IPQ/APQ8064 platforms. > + > +properties: > + compatible: > + oneOf: > + - const: qcom,adm > + > + reg: > + maxItems: 1 > + description: > + Address range for DMA registers > + > + interrupts: > + maxItems: 1 > + description: > + Should contain one interrupt shared by all channels > + > + "#dma-cells": > + const: 2 > + description: > + First cell denotes the channel number. Second cell denotes CRCI > + (client rate control interface) flow control assignment. If no > + flow control is required, use 0. > + > + clocks: > + maxItems: 2 > + description: > + Should contain the core clock and interface clock. > + > + clock-names: > + items: > + - const: core > + - const: iface > + > + resets: > + maxItems: 4 > + description: > + Must contain an entry for each entry in reset names. > + > + reset-names: > + items: > + - const: clk > + - const: c0 > + - const: c1 > + - const: c2 > + > + qcom,ee: > + maxItems: 1 > + description: > + Indicates the security domain identifier used in the secure world. > + $ref: /schemas/types.yaml#/definitions/uint32 > + > +required: > + - "#dma-cells" > + - compatible > + - reg > + - clocks > + - clock-names > + - interrupts > + - qcom,ee > + - resets > + - reset-names > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,gcc-ipq806x.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/reset/qcom,gcc-ipq806x.h> > + > + adm_dma: dma@18300000 { > + compatible = "qcom,adm"; > + reg = <0x18300000 0x100000>; > + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <2>; > + > + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; > + clock-names = "core", "iface"; > + > + resets = <&gcc ADM0_RESET>, > + <&gcc ADM0_C0_RESET>, > + <&gcc ADM0_C1_RESET>, > + <&gcc ADM0_C2_RESET>; > + reset-names = "clk", "c0", "c1", "c2"; > + qcom,ee = <0>; > + }; > + > +... > diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt > deleted file mode 100644 > index 9d3b2f917b7b..000000000000 > --- a/Documentation/devicetree/bindings/dma/qcom_adm.txt > +++ /dev/null > @@ -1,61 +0,0 @@ > -QCOM ADM DMA Controller > - > -Required properties: > -- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960 > -- reg: Address range for DMA registers > -- interrupts: Should contain one interrupt shared by all channels > -- #dma-cells: must be <2>. First cell denotes the channel number. Second cell > - denotes CRCI (client rate control interface) flow control assignment. > -- clocks: Should contain the core clock and interface clock. > -- clock-names: Must contain "core" for the core clock and "iface" for the > - interface clock. > -- resets: Must contain an entry for each entry in reset names. > -- reset-names: Must include the following entries: > - - clk > - - c0 > - - c1 > - - c2 > -- qcom,ee: indicates the security domain identifier used in the secure world. > - > -Example: > - adm_dma: dma@18300000 { > - compatible = "qcom,adm"; > - reg = <0x18300000 0x100000>; > - interrupts = <0 170 0>; > - #dma-cells = <2>; > - > - clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; > - clock-names = "core", "iface"; > - > - resets = <&gcc ADM0_RESET>, > - <&gcc ADM0_C0_RESET>, > - <&gcc ADM0_C1_RESET>, > - <&gcc ADM0_C2_RESET>; > - reset-names = "clk", "c0", "c1", "c2"; > - qcom,ee = <0>; > - }; > - > -DMA clients must use the format descripted in the dma.txt file, using a three > -cell specifier for each channel. > - > -Each dmas request consists of 3 cells: > - 1. phandle pointing to the DMA controller > - 2. channel number > - 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0. > - The CRCI is used for flow control. It identifies the peripheral device that > - is the source/destination for the transferred data. > - > -Example: > - > - spi4: spi@1a280000 { > - spi-max-frequency = <50000000>; > - > - pinctrl-0 = <&spi_pins>; > - pinctrl-names = "default"; > - > - cs-gpios = <&qcom_pinmux 20 0>; > - > - dmas = <&adm_dma 6 9>, > - <&adm_dma 5 10>; > - dma-names = "rx", "tx"; > - }; > -- > 2.29.2 -- ~Vinod
