This series of patches improves support for boards based on the Kendryte K210 RISC-V dual core SoC. Minimal support for this SoC is already included in the kernel. These patches complete it, enabling support for most peripherals present on the SoC as well as introducing device trees for the various K210 boards available on the market today from SiPeed and Kendryte. Pathes 1 to 4 are various fixes for riscv arch code and riscv dependent devices. Of note here is patch 3 which fix system calls execution in the no MMU case, and patch 4 which simplifies DTB builtin handling. Patch 5 fixes naming of directories and configuration options to use the K210 SoC vendor name (Canaan) instead of its branding name (Kendryte). The following patches 6 to 10 document device tree bindings for the SoC drivers. These drivers implementation is provided in patches 11, 12 and 13, respectively implementing the SoC clock driver, SOC pin function control and reset controller. Patches 14 to 19 update the existing K210 device tree and add new device tree files for several K210 based boards: MAIX Bit, MAIXDUINO, MAIX Dock and MAIX Go boards from SiPeed and the KD233 development board from Canaan. Finally the last two patches updates the k210 nommu defconfig to include the newly implemented drivers and provide a new default configuration file enabling SD card support. A lot of the work on the device tree and on the K210 drivers come from the work by Sean Anderson for the U-Boot project support of the K210 SoC. Sean also helped with debugging many aspects of this series. A tree with all patches applied is available here: https://github.com/damien-lemoal/linux, k210-sysctl-v15 branch. A demonstration of this series used on a SiPeed MAIX Dock board together with an I2C servo controller can be seen here: https://damien-lemoal.github.io/linux-robot-arm/#example This tree was used to build userspace busybox environment image that is then copied onto an SD card formatted with ext2: https://github.com/damien-lemoal/buildroot Of note is that running this userspace environment requires a revert of commit 2217b982624680d19a80ebb4600d05c8586c4f96 introduced during the 5.9 development cycle. Without this revert, execution of the init process fails. A problem with the riscv port of elf2flt is suspected but not confirmed. I am now starting to investigate this problem. Reviews and comments are as always much welcome. Changes from v1: * Improved DT bindings documentation * SPI and GPIO patches removed from this series (and being processed directly through the relevant subsystems directly) * Improved device trees * Various cleanup and improvments of the drivers Damien Le Moal (21): riscv: Fix kernel time_init() riscv: Fix sifive serial driver riscv: Enable interrupts during syscalls with M-Mode riscv: Fix builtin DTB handling riscv: Use vendor name for K210 SoC support dt-bindings: Add Canaan vendor prefix dt-binding: Document canaan,k210-clk bindings dt-bindings: Document canaan,k210-rst bindings dt-bindings: Document canaan,k210-fpioa bindings dt-binding: Document canaan,k210-sysctl bindings riscv: Add Canaan Kendryte K210 clock driver riscv: Add Canaan Kendryte K210 FPIOA driver riscv: Add Canaan Kendryte K210 reset controller riscv: Update Kendryte K210 device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add Kendryte KD233 board device tree riscv: Update Canaan Kendryte K210 defconfig riscv: Add Canaan Kendryte K210 SD card defconfig .../bindings/clock/canaan,k210-clk.yaml | 55 + .../bindings/mfd/canaan,k210-sysctl.yaml | 116 ++ .../bindings/pinctrl/canaan,k210-fpioa.yaml | 165 +++ .../bindings/reset/canaan,k210-rst.yaml | 40 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/riscv/Kconfig.socs | 38 +- arch/riscv/Makefile | 2 +- arch/riscv/boot/dts/Makefile | 2 +- arch/riscv/boot/dts/canaan/Makefile | 5 + arch/riscv/boot/dts/canaan/k210.dtsi | 625 +++++++++++ arch/riscv/boot/dts/canaan/k210_generic.dts | 46 + arch/riscv/boot/dts/canaan/k210_kd233.dts | 178 ++++ arch/riscv/boot/dts/canaan/k210_maix_bit.dts | 227 ++++ arch/riscv/boot/dts/canaan/k210_maix_dock.dts | 229 ++++ arch/riscv/boot/dts/canaan/k210_maix_go.dts | 237 +++++ arch/riscv/boot/dts/canaan/k210_maixduino.dts | 201 ++++ arch/riscv/boot/dts/kendryte/Makefile | 4 - arch/riscv/boot/dts/kendryte/k210.dts | 23 - arch/riscv/boot/dts/kendryte/k210.dtsi | 125 --- arch/riscv/configs/nommu_k210_defconfig | 36 +- .../riscv/configs/nommu_k210_sdcard_defconfig | 90 ++ arch/riscv/include/asm/soc.h | 38 - arch/riscv/kernel/entry.S | 9 + arch/riscv/kernel/soc.c | 27 - arch/riscv/kernel/time.c | 3 + arch/riscv/mm/init.c | 6 +- drivers/clk/Kconfig | 9 + drivers/clk/Makefile | 1 + drivers/clk/clk-k210.c | 959 +++++++++++++++++ drivers/pinctrl/Kconfig | 13 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-k210.c | 997 ++++++++++++++++++ drivers/reset/Kconfig | 9 + drivers/reset/Makefile | 1 + drivers/reset/reset-k210.c | 150 +++ drivers/soc/Kconfig | 2 +- drivers/soc/Makefile | 2 +- drivers/soc/canaan/Kconfig | 9 + drivers/soc/canaan/Makefile | 3 + drivers/soc/canaan/k210-sysctl.c | 89 ++ drivers/soc/kendryte/Kconfig | 14 - drivers/soc/kendryte/Makefile | 3 - drivers/soc/kendryte/k210-sysctl.c | 260 ----- drivers/tty/serial/sifive.c | 1 + include/dt-bindings/clock/k210-clk.h | 61 +- include/dt-bindings/pinctrl/k210-fpioa.h | 276 +++++ include/dt-bindings/reset/k210-rst.h | 42 + include/soc/canaan/k210-sysctl.h | 43 + 48 files changed, 4944 insertions(+), 530 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml create mode 100644 Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml create mode 100644 Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml create mode 100644 arch/riscv/boot/dts/canaan/Makefile create mode 100644 arch/riscv/boot/dts/canaan/k210.dtsi create mode 100644 arch/riscv/boot/dts/canaan/k210_generic.dts create mode 100644 arch/riscv/boot/dts/canaan/k210_kd233.dts create mode 100644 arch/riscv/boot/dts/canaan/k210_maix_bit.dts create mode 100644 arch/riscv/boot/dts/canaan/k210_maix_dock.dts create mode 100644 arch/riscv/boot/dts/canaan/k210_maix_go.dts create mode 100644 arch/riscv/boot/dts/canaan/k210_maixduino.dts delete mode 100644 arch/riscv/boot/dts/kendryte/Makefile delete mode 100644 arch/riscv/boot/dts/kendryte/k210.dts delete mode 100644 arch/riscv/boot/dts/kendryte/k210.dtsi create mode 100644 arch/riscv/configs/nommu_k210_sdcard_defconfig create mode 100644 drivers/clk/clk-k210.c create mode 100644 drivers/pinctrl/pinctrl-k210.c create mode 100644 drivers/reset/reset-k210.c create mode 100644 drivers/soc/canaan/Kconfig create mode 100644 drivers/soc/canaan/Makefile create mode 100644 drivers/soc/canaan/k210-sysctl.c delete mode 100644 drivers/soc/kendryte/Kconfig delete mode 100644 drivers/soc/kendryte/Makefile delete mode 100644 drivers/soc/kendryte/k210-sysctl.c create mode 100644 include/dt-bindings/pinctrl/k210-fpioa.h create mode 100644 include/dt-bindings/reset/k210-rst.h create mode 100644 include/soc/canaan/k210-sysctl.h -- 2.28.0
