This patch converts text based dt-binding document to YAML based dt-binding document. Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> --- .../devicetree/bindings/ata/nvidia,tegra-ahci.yaml | 138 +++++++++++++++++++++ .../bindings/ata/nvidia,tegra124-ahci.txt | 44 ------- 2 files changed, 138 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml delete mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml new file mode 100644 index 0000000..3c15aea --- /dev/null +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/nvidia,tegra-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra AHCI SATA Controller + +maintainers: + - Thierry Reding <thierry.reding@xxxxxxxxx> + - Jonathan Hunter <jonathanh@xxxxxxxxxx> + +properties: + compatible: + enum: + - nvidia,tegra124-ahci + - nvidia,tegra132-ahci + - nvidia,tegra210-ahci + + reg: + minItems: 2 + maxItems: 3 + items: + - description: AHCI registers + - description: SATA configuration and IPFS registers + - description: SATA AUX registers + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: sata + - const: sata-oob + + clocks: + maxItems: 2 + + reset-names: + items: + - const: sata + - const: sata-cold + - const: sata-oob + + resets: + maxItems: 3 + + phy-names: + items: + - const: sata-0 + + phys: + maxItems: 1 + + hvdd-supply: + description: SATA HVDD regulator supply. + + vddio-supply: + description: SATA VDDIO regulator supply. + + avdd-supply: + description: SATA AVDD regulator supply. + + target-5v-supply: + description: SATA 5V power regulator supply. + + target-12v-supply: + description: SATA 12V power regulator supply. + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + - reset-names + - resets + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra124-ahci + - nvidia,tegra132-ahci + then: + properties: + reg: + maxItems: 2 + reset-names: + minItems: 3 + resets: + minItems: 3 + required: + - phys + - phy-names + - hvdd-supply + - vddio-supply + - avdd-supply + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra210-ahci + then: + properties: + reg: + minItems: 3 + reset-names: + minItems: 3 + resets: + minItems: 3 + +additionalProperties: true + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/reset/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sata@70020000 { + compatible = "nvidia,tegra210-ahci"; + reg = <0x70027000 0x00002000>, /* AHCI */ + <0x70020000 0x00007000>, /* SATA */ + <0x70001100 0x00010000>; /* SATA AUX */ + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SATA>, + <&tegra_car TEGRA210_CLK_SATA_OOB>; + clock-names = "sata", "sata-oob"; + resets = <&tegra_car 124>, + <&tegra_car 129>, + <&tegra_car 123>; + reset-names = "sata", "sata-cold", "sata-oob"; + }; diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt deleted file mode 100644 index 12ab2f7..0000000 --- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt +++ /dev/null @@ -1,44 +0,0 @@ -Tegra SoC SATA AHCI controller - -Required properties : -- compatible : Must be one of: - - Tegra124 : "nvidia,tegra124-ahci" - - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci" - - Tegra210 : "nvidia,tegra210-ahci" -- reg : Should contain 2 entries: - - AHCI register set (SATA BAR5) - - SATA register set -- interrupts : Defines the interrupt used by SATA -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - - sata - - sata-oob -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - sata - - sata-oob - - sata-cold -- phys : Must contain an entry for each entry in phy-names. - See ../phy/phy-bindings.txt for details. -- phy-names : Must include the following entries: - - For Tegra124 and Tegra132: - - sata-phy : XUSB PADCTL SATA PHY -- For Tegra124 and Tegra132: - - hvdd-supply : Defines the SATA HVDD regulator - - vddio-supply : Defines the SATA VDDIO regulator - - avdd-supply : Defines the SATA AVDD regulator - - target-5v-supply : Defines the SATA 5V power regulator - - target-12v-supply : Defines the SATA 12V power regulator - -Optional properties: -- reg : - - AUX register set -- clock-names : - - cml1 : - cml1 clock should be defined here if the PHY driver - doesn't manage them. If it does, they should not be. -- phy-names : - - For T210: - - sata-phy -- 2.7.4
