On Sun, Nov 22, 2020 at 8:40 AM Icenowy Zheng <icenowy@xxxxxxx> wrote:
>
> As the USB port on Lichee Pi Zero works in the OTG mode, enable the
> EHCI/OHCI controllers for it.
You should probably mention that the host controllers work better
than the OTG controller in host mode. Otherwise this change lacks
justification for enabling two extra hardware blocks.
ChenYu
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
> index 2e4587d26ce5..0cd969194acb 100644
> --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
> +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
> @@ -77,6 +77,10 @@ red_led {
> };
> };
>
> +&ehci0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> broken-cd;
> bus-width = <4>;
> @@ -84,6 +88,10 @@ &mmc0 {
> status = "okay";
> };
>
> +&ohci0 {
> + status = "okay";
> +};
> +
> &uart0 {
> pinctrl-0 = <&uart0_pb_pins>;
> pinctrl-names = "default";
> --
> 2.28.0
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20201122004011.1957325-1-icenowy%40aosc.io.
