This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and is typically implemented as a TI MSP430 microcontroller. It controls different functions of the system, such as power on/off, RTC, PWM for the backlight. The exact functionality provided can vary between boards. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- v4: - Add R-b tag v3: - https://lore.kernel.org/lkml/20200924192455.2484005-3-j.neuschaefer@xxxxxxx/ - Remove binding in text form patch description again - Add additionalProperties: false - Remove interrupt-controller property from example - Merge pwm/rtc nodes into main node v2: - https://lore.kernel.org/lkml/20200905133230.1014581-3-j.neuschaefer@xxxxxxx/ - Add the plaintext DT binding for comparison --- .../bindings/mfd/netronix,ntxec.yaml | 76 +++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml new file mode 100644 index 0000000000000..59a630025f52f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/netronix,ntxec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Netronix Embedded Controller + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> + +description: | + This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and + is typically implemented as a TI MSP430 microcontroller. + +properties: + compatible: + const: netronix,ntxec + + reg: + items: + - description: The I2C address of the EC + + system-power-controller: + type: boolean + description: See Documentation/devicetree/bindings/power/power-controller.txt + + interrupts: + minItems: 1 + description: + The EC can signal interrupts via a GPIO line + + "#pwm-cells": + const: 2 + description: | + Number of cells in a PWM specifier. + + The following PWM channels are supported: + - 0: The PWM channel controlled by registers 0xa1-0xa7 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ec: embedded-controller@43 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ntxec>; + + compatible = "netronix,ntxec"; + reg = <0x43>; + system-power-controller; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + #pwm-cells = <2>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-dummy { + compatible = "regulator-fixed"; + regulator-name = "backlight"; + }; -- 2.29.2
