On Tue, 3 Nov 2020 17:24:08 +0000
Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> wrote:
> On Tue, 3 Nov 2020 10:38:00 -0600
> Rob Herring <robh@xxxxxxxxxx> wrote:
>
> > On Sat, Oct 31, 2020 at 06:48:08PM +0000, Jonathan Cameron wrote:
> > > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > >
> > > This set is basically all the stuff bindings where I couldn't come up
> > > with a unifying theme to split them out into smaller more palatble sets.
> > >
> > > So there is all sorts in here :) Enjoy.
> >
> > Thanks for filling my inbox... :)
> Always happy to do that :)
>
> I definitely recall you saying you liked to review them lots at a time.
> *evil laugh*
>
> Thanks for ploughing through them so quickly.
>
> Jonathan
>
Quick status update on this series.
I've applied everything (with fixes as suggested and a few maintainers changed
due to bouncing emails) except:
7, 8 : Andrew's email is bouncing and there are questions open on differences
between the binding and the driver so I've reached out to him via
other means.
29: Going as part of a difference series.
39: XOR tricks and the question on what syntax will let me drop the definitions
block as suggested as I can't figure it out! @Rob this is the same question
raised on the other similar case.
I've applied 9, but couldn't make a simplification I thought should work so have
an open question on that one.
In the interests of making it easier to keep track of what is left, I may well
just pull all the remaining patches from my various series into a single one
one which we can address outstanding questions. Still a few more to catch up
on before I can do that however!
Thanks,
Jonathan
>
> >
> > > There are a few more binding files left after these are done.
> > > * io-channel-mux: Needs conversion of the mux subsystem bindings
> > > * xilinx-xadc: I think Lars is working on this one already.
> > > * lis302: This one got moved to IIO directory, but reflects a bunch of stuff
> > > that would not have made it into an IIO binding. The driver is still in
> > > misc and in theory has been replaced by the st-sensors driver.
> > > Need to think what to do about this one.
> > > * mount-matrix.txt: The binding part is under review for inclusion in
> > > dt-schema rather than kernel tree, but this document has a wealth of
> > > information we don't want hidden away there. As such I'm probably
> > > going to convert it to general kernel documentation.
> > >
> > > Final patch in here drops the generic temperatures sensor binding.
> > > Whilst I'm keen on that we only currently have one user. So I'd
> > > rather we had a second before we went to the effort of defining a
> > > proper yaml binding for that.
> > >
> > > Jonathan Cameron (46):
> > > dt-bindings:iio:resolver:adi,ad2s90: Conversion of binding to yaml.
> > > dt-bindings:iio:potentiometer:adi,ad5272 yaml conversion
> > > dt-bindings:iio:potentiometer:microchip,mcp4131 txt to yaml conversion
> > > dt-bindings:iio:potentiometer:microchip,mcp41010 txt to yaml
> > > conversion
> > > dt-bindings:iio:impedance-analyzer:adi,ad5933 yaml conversion.
> > > dt-bindings:iio:samsung,sensorhub-rinato: yaml conversion
> > > dt-bindings:iio:health:ti,afe4403: txt to yaml binding
> > > dt-bindings:iio:health:ti,afe4404: txt to yaml conversion
> > > dt-bindings:iio:health:maxim,max30100: txt to yaml conversion
> > > dt-bindings:iio:health:maxim,max30102: txt to yaml conversion
> > > dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
> > > dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
> > > dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
> > > dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
> > > dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
> > > dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
> > > dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
> > > dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
> > > dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
> > > dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV
> > > sensor
> > > dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
> > > dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
> > > dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
> > > dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format
> > > conversion
> > > dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml
> > > conversion.
> > > dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format
> > > conversion
> > > dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
> > > dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
> > > dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from
> > > at91_adc.txt
> > > dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
> > > dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
> > > dt-bindings:iio:adc:brcm,iproc-static-adc: txt to yaml conversion
> > > dt-bindings:iio:adc:mediatek,mt2701-auxadc: rename and yaml
> > > conversion.
> > > dt-bindings:iio:adc:ti,palmas-gpadc: txt to yaml format conversion.
> > > dt-bindings:iio:adc:qcom,pm8018-adc: yaml conversion and rename.
> > > dt-bindings:iio:adc:qcom,spmi-iadc: txt to yaml format conversion.
> > > dt-binding:iio:adc:ti,ads124s08: txt to yaml format conversion.
> > > dt-bindings:iio:dac:ad5592r: txt to yaml format conversion.
> > > dt-bindings:iio:dac:ad5755: txt to yaml format conversion.
> > > dt-bindings:iio:accel:bosch,bma180: txt to yaml format conversion.
> > > dt-bindings:iio:accel:kionix,kxcjk1013: txt to yaml format conversion.
> > > dt-bindings:iio:accel:fsl,mma8452: txt to yaml conversion.
> > > dt-bindings:iio:gyro:bosch,bmg180: txt to yaml format conversion.
> > > dt-bindings:iio:st,st-sensors: txt to yaml conversion.
> > > dt-bindings:iio:frequency:adi,adf4350: txt to yaml format conversion.
> > > dt-bindings:iio:temperature: Drop generic binding file.
> >
> > There's more standard unit properties you can drop the type $ref on and
> > a the couple of nits I raised. With those fixed,
> >
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>
> Great. Thanks again,
>
> Jonathan
>
