Re: [PATCH v2 1/2] iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 17 Nov 2020 17:47:25 +0100
Lorenzo Bianconi <lorenzo@xxxxxxxxxx> wrote:

> Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power
> lines. Introduce voltage regulators to control them.
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
Oops. I should have pointed out the dev_err_probe more appropriate
to avoid complaining when we just tried to probe to early in the
sequence and will try again later.  I'll hopefully fix this
up an apply once I've picked up my own patch to do the yaml conversion.

Jonathan

> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  3 ++
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 42 ++++++++++++++++++++
>  2 files changed, 45 insertions(+)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 1f31657a7a0e..4b4ec39d4400 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -13,6 +13,7 @@
>  
>  #include <linux/device.h>
>  #include <linux/iio/iio.h>
> +#include <linux/regulator/consumer.h>
>  
>  #define ST_LSM6DS3_DEV_NAME	"lsm6ds3"
>  #define ST_LSM6DS3H_DEV_NAME	"lsm6ds3h"
> @@ -368,6 +369,7 @@ struct st_lsm6dsx_sensor {
>   * struct st_lsm6dsx_hw - ST IMU MEMS hw instance
>   * @dev: Pointer to instance of struct device (I2C or SPI).
>   * @regmap: Register map of the device.
> + * @regulators: VDD/VDDIO voltage regulators.
>   * @irq: Device interrupt line (I2C or SPI).
>   * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
>   * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
> @@ -390,6 +392,7 @@ struct st_lsm6dsx_sensor {
>  struct st_lsm6dsx_hw {
>  	struct device *dev;
>  	struct regmap *regmap;
> +	struct regulator_bulk_data regulators[2];
>  	int irq;
>  
>  	struct mutex fifo_lock;
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 5e584c6026f1..fde46377826c 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -2533,6 +2533,40 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
>  	return 0;
>  }
>  
> +static int st_lsm6dsx_init_regulators(struct device *dev)
> +{
> +	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
> +	int err;
> +
> +	/* vdd-vddio power regulators */
> +	hw->regulators[0].supply = "vdd";
> +	hw->regulators[1].supply = "vddio";
> +	err = devm_regulator_bulk_get(dev, ARRAY_SIZE(hw->regulators),
> +				      hw->regulators);
> +	if (err) {
> +		dev_err(dev, "failed to get regulators: %d\n", err);
> +		return err;
> +	}
> +
> +	err = regulator_bulk_enable(ARRAY_SIZE(hw->regulators),
> +				    hw->regulators);
> +	if (err) {
> +		dev_err(dev, "failed to enable regulators: %d\n", err);
> +		return err;
> +	}
> +
> +	msleep(50);
> +
> +	return 0;
> +}
> +
> +static void st_lsm6dsx_chip_uninit(void *data)
> +{
> +	struct st_lsm6dsx_hw *hw = data;
> +
> +	regulator_bulk_disable(ARRAY_SIZE(hw->regulators), hw->regulators);
> +}
> +
>  int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  		     struct regmap *regmap)
>  {
> @@ -2552,6 +2586,14 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
>  	mutex_init(&hw->conf_lock);
>  	mutex_init(&hw->page_lock);
>  
> +	err = st_lsm6dsx_init_regulators(dev);
> +	if (err)
> +		return err;
> +
> +	err = devm_add_action_or_reset(dev, st_lsm6dsx_chip_uninit, hw);
> +	if (err)
> +		return err;
> +
>  	hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL);
>  	if (!hw->buff)
>  		return -ENOMEM;




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux