On Thu 12 Nov 10:21 CST 2020, Caleb Connolly wrote:
[..]
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> new file mode 100644
> index 000000000000..4e6477f1e574
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> @@ -0,0 +1,822 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source
> + *
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/input/linux-event-codes.h>
Please keep these sorted alphabetically.
> +#include "sdm845.dtsi"
> +
> +// Needed for some GPIO (like the volume buttons)
This is or is going to be needed for more things, so feel free to skip
this comment.
> +#include "pm8998.dtsi"
> +#include "pmi8998.dtsi"
> +
> +/ {
> +
> + aliases {
> + hsuart0 = &uart6;
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> + };
> +
> + /*
> + * Apparently RPMh does not provide support for PM8998 S4 because it
> + * is always-on; model it as a fixed regulator.
> + */
> + vreg_s4a_1p8: pm8998-smps4 {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_s4a_1p8";
> +
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> +
> + vin-supply = <&vph_pwr>;
> + };
> +
> + /*
> + * The touchscreen regulator seems to be controlled somehow by a gpio.
> + */
> + ts_1p8_supply: ts_1v8_regulator {
Please don't use _ in the node name.
> + compatible = "regulator-fixed";
> + regulator-name = "ts_1p8_supply";
> +
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + gpio = <&tlmm 88 0>;
> + enable-active-high;
> + regulator-boot-on;
> + };
> +
> + gpio_tristate_key: gpio-keys {
> + compatible = "gpio-keys";
> + label = "Tri-state keys";
What kind of button is this?
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&tri_state_key_default>;
> +
> + state-top {
> + label = "Tri-state key top";
> + linux,code = <KEY_MACRO1>;
> + interrupt-parent = <&tlmm>;
> + interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
> + debounce-interval = <500>;
> + linux,can-disable;
> + };
> +
> + state-middle {
> + label = "Tri-state key middle";
> + linux,code = <KEY_MACRO2>;
> + interrupt-parent = <&tlmm>;
> + interrupts = <52 IRQ_TYPE_EDGE_FALLING>;
> + debounce-interval = <500>;
> + linux,can-disable;
> + };
> +
> + state-bottom {
> + label = "Tri-state key bottom";
> + linux,code = <KEY_MACRO3>;
> + interrupt-parent = <&tlmm>;
> + interrupts = <126 IRQ_TYPE_EDGE_FALLING>;
> + debounce-interval = <500>;
> + linux,can-disable;
> + };
> + };
[..]
> +/* Reserved memory changes */
> +/delete-node/ &rmtfs_mem;
> +
> +/ {
You already have one top-level section higher up, please group this in
there as well.
> + reserved-memory {
[..]
> +&mdss {
To avoid trouble finding your way around this file in the future I would
prefer if you sorted the nodes alphabetically.
> + status = "okay";
> +};
> +
[..]
> +&i2c12 {
> + status = "okay";
> +
> + touchscreen: synaptics-rmi4-i2c@20 {
You don't reference &touchscreen, so please omit this..
Regards,
Bjorn
