On Fri, 20 Nov 2020 14:43:04 -0500, Al Cooper wrote: > Add DT bindings for the Broadcom 8250 based UART driver. This > UART is based on an 8250 but adds additional functionality. The > additional features include the ability to use DMA for transfers and > a baud rate clock system that is more accurate at high baud rates. > This UART is backward compatible with the standard 8250 UART. > > Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx> > --- > .../bindings/serial/brcm,bcm7271-uart.yaml | 94 +++++++++++++++++++ > 1 file changed, 94 insertions(+) > create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml: 'additionalProperties' is a required property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml: ignoring, error in schema: warning: no schema found in file: ./Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml See https://patchwork.ozlabs.org/patch/1404090 The base for the patch is generally the last rc1. Any dependencies should be noted. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
