Convert the bindings document for Microchip KSZ Series Ethernet switches
from txt to yaml. Removed spi-cpha and spi-cpol flags is this should be
handled by the device driver.
Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
---
.../devicetree/bindings/net/dsa/ksz.txt | 125 ---------------
.../bindings/net/dsa/microchip,ksz.yaml | 148 ++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 149 insertions(+), 126 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/dsa/ksz.txt
create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
deleted file mode 100644
index 95e91e84151c..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-Microchip KSZ Series Ethernet switches
-==================================
-
-Required properties:
-
-- compatible: For external switch chips, compatible string must be exactly one
- of the following:
- - "microchip,ksz8765"
- - "microchip,ksz8794"
- - "microchip,ksz8795"
- - "microchip,ksz9477"
- - "microchip,ksz9897"
- - "microchip,ksz9896"
- - "microchip,ksz9567"
- - "microchip,ksz8565"
- - "microchip,ksz9893"
- - "microchip,ksz9563"
- - "microchip,ksz8563"
-
-Optional properties:
-
-- reset-gpios : Should be a gpio specifier for a reset line
-- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
- 125MHz instead of 25MHz.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-
-Examples:
-
-Ethernet switch connected via SPI to the host, CPU port wired to eth0:
-
- eth0: ethernet@10001000 {
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- spi1: spi@f8008000 {
- pinctrl-0 = <&pinctrl_spi_ksz>;
- cs-gpios = <&pioC 25 0>;
- id = <1>;
-
- ksz9477: ksz9477@0 {
- compatible = "microchip,ksz9477";
- reg = <0>;
-
- spi-max-frequency = <44000000>;
- spi-cpha;
- spi-cpol;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- label = "lan1";
- };
- port@1 {
- reg = <1>;
- label = "lan2";
- };
- port@2 {
- reg = <2>;
- label = "lan3";
- };
- port@3 {
- reg = <3>;
- label = "lan4";
- };
- port@4 {
- reg = <4>;
- label = "lan5";
- };
- port@5 {
- reg = <5>;
- label = "cpu";
- ethernet = <ð0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
- ksz8565: ksz8565@0 {
- compatible = "microchip,ksz8565";
- reg = <0>;
-
- spi-max-frequency = <44000000>;
- spi-cpha;
- spi-cpol;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- label = "lan1";
- };
- port@1 {
- reg = <1>;
- label = "lan2";
- };
- port@2 {
- reg = <2>;
- label = "lan3";
- };
- port@3 {
- reg = <3>;
- label = "lan4";
- };
- port@6 {
- reg = <6>;
- label = "cpu";
- ethernet = <ð0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
new file mode 100644
index 000000000000..9f7d131bbcef
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip KSZ Series Ethernet switches
+
+maintainers:
+ - Marek Vasut <marex@xxxxxxx>
+ - Woojung Huh <Woojung.Huh@xxxxxxxxxxxxx>
+
+allOf:
+ - $ref: dsa.yaml#
+
+properties:
+ # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
+ # required and optional properties.
+ compatible:
+ enum:
+ - microchip,ksz8765
+ - microchip,ksz8794
+ - microchip,ksz8795
+ - microchip,ksz9477
+ - microchip,ksz9897
+ - microchip,ksz9896
+ - microchip,ksz9567
+ - microchip,ksz8565
+ - microchip,ksz9893
+ - microchip,ksz9563
+ - microchip,ksz8563
+
+ reset-gpios:
+ description:
+ Should be a gpio specifier for a reset line.
+ maxItems: 1
+
+ microchip,synclko-125:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
+ eth0 {
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&pinctrl_spi_ksz>;
+ cs-gpios = <&pioC 25 0>;
+ id = <1>;
+
+ ksz9477: switch@0 {
+ compatible = "microchip,ksz9477";
+ reg = <0>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+ spi-max-frequency = <44000000>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ port@4 {
+ reg = <4>;
+ label = "lan5";
+ };
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ ksz8565: switch@1 {
+ compatible = "microchip,ksz8565";
+ reg = <1>;
+
+ spi-max-frequency = <44000000>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <ð0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 18b5b7896af8..d1003033412f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11508,7 +11508,7 @@ M: Woojung Huh <woojung.huh@xxxxxxxxxxxxx>
M: Microchip Linux Driver Support <UNGLinuxDriver@xxxxxxxxxxxxx>
L: netdev@xxxxxxxxxxxxxxx
S: Maintained
-F: Documentation/devicetree/bindings/net/dsa/ksz.txt
+F: Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
F: drivers/net/dsa/microchip/*
F: include/linux/platform_data/microchip-ksz.h
F: net/dsa/tag_ksz.c
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
