From: Eddie James <eajames@xxxxxxxxxxxxx> Add the P10 compatible string. Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx> Reviewed-by: Joel Stanley <joel@xxxxxxxxx> Signed-off-by: Joel Stanley <joel@xxxxxxxxx> --- Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt index 99ca9862a586..e73358075a90 100644 --- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt @@ -1,13 +1,13 @@ -Device-tree bindings for FSI-attached POWER9 On-Chip Controller (OCC) ---------------------------------------------------------------------- +Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC) +----------------------------------------------------------------------------- -This is the binding for the P9 On-Chip Controller accessed over FSI from a -service processor. See fsi.txt for details on bindings for FSI slave and CFAM +This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from +a service processor. See fsi.txt for details on bindings for FSI slave and CFAM nodes. The OCC is not an FSI slave device itself, rather it is accessed -through the SBE fifo. +through the SBE FIFO. Required properties: - - compatible = "ibm,p9-occ" + - compatible = "ibm,p9-occ" or "ibm,p10-occ" Examples: -- 2.29.2
