Add support for TI's AM437x StarterKit Evaluation Module. Cc: Josh Elliot <jelliott@xxxxxx> Cc: Darren Etheridge <detheridge@xxxxxx> Signed-off-by: Felipe Balbi <balbi@xxxxxx> --- changes since v1: - add pinctrl for leds and matrix keypad - added i2c1 and i2c0 speeds of 400k - added voltage for vdds_ddr - reordered mmc1 node left the USB supply thing out because a) the driver doesn't use it and b) the regulator will be automatically sitched off iff DRVVBUS signal goes low (that's done automatically by the HW). Not to mention that there's really no benefit from the kernel or userland point of view. (I do have a patch for that locally though, so if people really want it, I can easily fold the patch into this). All patches are available at [1] [1] https://git.kernel.org/cgit/linux/kernel/git/balbi/usb.git/log/?h=am437x-starterkit .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am437x-sk-evm.dts | 613 +++++++++++++++++++++ 3 files changed, 617 insertions(+) create mode 100644 arch/arm/boot/dts/am437x-sk-evm.dts diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index d22b216..0edc903 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -129,6 +129,9 @@ Boards: - AM437x GP EVM compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43" +- AM437x SK EVM: AM437x StarterKit Evaluation Module + compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 621c6c5..a85a4b8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -306,6 +306,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-var-dvk-om44.dtb \ omap4-var-stk-om44.dtb dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ + am437x-sk-evm.dtb \ am437x-gp-evm.dtb dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ omap5-sbc-t54.dtb \ diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts new file mode 100644 index 0000000..859ff3d --- /dev/null +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -0,0 +1,613 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* AM437x SK EVM */ + +/dts-v1/; + +#include "am4372.dtsi" +#include <dt-bindings/pinctrl/am43xx.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "TI AM437x SK EVM"; + compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43"; + + aliases { + display0 = &lcd0; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM437x-SK-EVM"; + ti,audio-codec = <&tlv320aic3106>; + ti,mcasp-controller = <&mcasp1>; + ti,codec-clock-rate = <24000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT"; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_pins>; + + debounce-delay-ms = <5>; + col-scan-delay-us = <1500>; + + row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */ + &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */ + + col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */ + &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */ + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_DOWN) + MATRIX_KEY(0, 1, KEY_RIGHT) + MATRIX_KEY(1, 0, KEY_LEFT) + MATRIX_KEY(1, 1, KEY_UP) + >; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led@0 { + label = "am437x-sk:red:heartbeat"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@1 { + label = "am437x-sk:green:mmc1"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */ + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@2 { + label = "am437x-sk:blue:cpu0"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */ + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@3 { + label = "am437x-sk:blue:usr3"; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */ + default-state = "off"; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <43>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; +}; + +&am43xx_pinmux { + matrix_keypad_pins: matrix_keypad_pins { + pinctrl-single,pins = < + 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */ + 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */ + 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */ + 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */ + >; + }; + + leds_pins: leds_pins { + pinctrl-single,pins = < + 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */ + 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */ + 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */ + 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */ + >; + }; + + i2c0_pins: i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: i2c1_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + >; + }; + + edt_ft5306_ts_pins: edt_ft5306_ts_pins { + pinctrl-single,pins = < + 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + + /* Slave 2 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value */ + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + + >; + }; + + qspi_pins: qspi_pins { + pinctrl-single,pins = < + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + >; + }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPIO 5_8 to select LCD / HDMI */ + 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + tps@24 { + compatible = "ti,tps65218"; + reg = <0x24>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + /* VDD_CORE limits min of OPP50 and max of OPP100 */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdds_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc4: regulator-dcdc4 { + compatible = "ti,tps65218-dcdc4"; + regulator-name = "v3_3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-name = "v1_8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + }; + + at24@50 { + compatible = "at24,24c256"; + pagesize = <64>; + reg = <0x50>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <31 0>; + + wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + }; + + tlv320aic3106: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&dcdc4>; + IOVDD-supply = <&dcdc4>; + DRVDD-supply = <&dcdc4>; + DVDD-supply = <&ldo1>; + }; + + lis331dlh@18 { + compatible = "st,lis331dlh"; + reg = <0x18>; + status = "okay"; + + Vdd-supply = <&dcdc4>; + Vdd_IO-supply = <&dcdc4>; + interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + vmmc-supply = <&dcdc4>; + bus-width = <4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; +}; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first 512KiB + * for a valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <5>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&elm { + status = "okay"; +}; + +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp1_pins>; + + status = "okay"; + + op-mode = <0>; + tdm-slots = <2>; + serial-dir = < + 0 0 1 2 + >; + + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&dss { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; -- 2.0.0.390.gcb682f8 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html