[PATCH v2 0/4] arm64: dts: ti: J7200 GPIO support and warning fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



These patches add gpio support for TI's J7200 platform. The first
two patches fix existing warnings in preparation for adding GPIO
support.

Changes in v2:
- Add patches fixing existing warnings so GPIO support does not
  end up adding more warnings
- Addressed Nishanth's comments on GPIO patches
  - merge patches adding main and wakeup domain GPIOs into single patch
  - fix commit description going over 75 chars
  - fix W=2 warnings about lack of #address-cells in GPIO nodes

Faiz Abbas (2):
  arm64: dts: ti: k3-j7200: Add gpio nodes
  arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio
    modules

Sekhar Nori (2):
  arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells
  arm64: dts: ti: k3: squelch warnings regarding no #address-cells for
    interrupt-controller

 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |  6 ++
 arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi    |  2 +
 .../arm64/boot/dts/ti/k3-am654-base-board.dts |  1 +
 .../dts/ti/k3-j7200-common-proc-board.dts     | 16 ++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 75 +++++++++++++++++++
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      | 35 +++++++++
 .../dts/ti/k3-j721e-common-proc-board.dts     |  1 +
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 12 +++
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  3 +
 9 files changed, 151 insertions(+)

-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux