Hi Ahmad
On 10/21/20 12:28 PM, Ahmad Fatoum wrote:
The stm32mp1 TAMP peripheral has 32 backup registers that survive
a warm reset. This makes them suitable for storing a reboot
mode, which the vendor's kernel tree is already doing[0].
The actual syscon-reboot-mode child node can be added by a board.dts or
fixed up by the bootloader. For the child node to be probed, the
compatible needs to include simple-mfd. The binding now specifies this,
so have the SoC dtsi adhere to it.
[0]: https://github.com/STMicroelectronics/linux/commit/2e9bfc29dd
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
v1 -> v2:
- Dropped simple-bus. simple-mfd is all that's needed
- reworded commit message
---
arch/arm/boot/dts/stm32mp151.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 842ecffae73a..662c2408d41b 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1542,7 +1542,7 @@ i2c6: i2c@5c009000 {
};
tamp: tamp@5c00a000 {
- compatible = "st,stm32-tamp", "syscon";
+ compatible = "st,stm32-tamp", "syscon", "simple-mfd";
reg = <0x5c00a000 0x400>;
};
Series applied on stm32-next.
Regards
Alex
