On Sun, Nov 15, 2020 at 07:52:07PM +0100, Martin Blumenstingl wrote:
> The timing-adjustment clock only has to be enabled when a) there is a
> 2ns RX delay configured using device-tree and b) the phy-mode indicates
> that the RX delay should be enabled.
>
> Only enable the RX delay if both are true, instead of (by accident) also
> enabling it when there's the 2ns RX delay configured but the phy-mode
> incicates that the RX delay is not used.
>
> Fixes: 9308c47640d515 ("net: stmmac: dwmac-meson8b: add support for the RX delay configuration")
> Reported-by: Andrew Lunn <andrew@xxxxxxx>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Andrew
