From: Rafał Miłecki <rafal@xxxxxxxxxx> 1. Convert from txt to yaml 2. Drop "Driver for" from the title 3. Document "#phy-cells" 4. Fix example node name (noticed by dt_binding_check) 5. Add #include to example (noticed by dt_binding_check) 6. Specify license Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx> --- I think this should go through linux-phy tree. Kishon, Vinod, can you take this patch? This patch generates a false positive checkpatch.pl warning [0]. Please ignore: WARNING: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst [0] https://lkml.org/lkml/2020/2/18/1084 --- .../bindings/phy/bcm-ns-usb2-phy.txt | 21 ------- .../bindings/phy/bcm-ns-usb2-phy.yaml | 59 +++++++++++++++++++ 2 files changed, 59 insertions(+), 21 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt deleted file mode 100644 index a7aee9ea8926..000000000000 --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt +++ /dev/null @@ -1,21 +0,0 @@ -Driver for Broadcom Northstar USB 2.0 PHY - -Required properties: -- compatible: brcm,ns-usb2-phy -- reg: iomem address range of DMU (Device Management Unit) -- reg-names: "dmu", the only needed & supported reg right now -- clocks: USB PHY reference clock -- clock-names: "phy-ref-clk", the only needed & supported clock right now - -To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it -requires passing phandle to the USB PHY reference clock. - -Example: - usb2-phy { - compatible = "brcm,ns-usb2-phy"; - reg = <0x1800c000 0x1000>; - reg-names = "dmu"; - #phy-cells = <0>; - clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; - clock-names = "phy-ref-clk"; - }; diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml new file mode 100644 index 000000000000..05b4dcd80019 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/bcm-ns-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar USB 2.0 PHY + +description: > + To initialize USB 2.0 PHY driver needs to setup PLL correctly. + To do this it requires passing phandle to the USB PHY reference clock. + +maintainers: + - Rafał Miłecki <rafal@xxxxxxxxxx> + +properties: + compatible: + const: brcm,ns-usb2-phy + + reg: + items: + - description: iomem address range of DMU (Device Management Unit) + + reg-names: + items: + - const: dmu + + clocks: + items: + - description: USB PHY reference clock + + clock-names: + items: + - const: phy-ref-clk + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm-nsp.h> + phy@1800c000 { + compatible = "brcm,ns-usb2-phy"; + reg = <0x1800c000 0x1000>; + reg-names = "dmu"; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + #phy-cells = <0>; + }; -- 2.27.0
