Hi Gregory, v2 of series with changes for Turris Omnia device tree. It applies on mvebu-dt branch. Changes from v1: - added patch which adds description for switch interrupt - removed patch adding ethernet-phy interrupt: the PHY interrupt is asserted by level low, but the GPIO expander driver supports only edge rising/falling, and even then it may not be correct when an interrupt storm occurs. So keep polling the PHY - added Andrew's Reviewed-by tags Marek Cc: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx> Cc: Jason Cooper <jason@xxxxxxxxxxxxxx> Cc: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx> Cc: Andreas Färber <afaerber@xxxxxxx> Cc: Andrew Lunn <andrew@xxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Marek Behún (6): ARM: dts: turris-omnia: enable HW buffer management ARM: dts: turris-omnia: add comphy handle to eth2 ARM: dts: turris-omnia: describe switch interrupt ARM: dts: turris-omnia: add SFP node ARM: dts: turris-omnia: add LED controller node ARM: dts: turris-omnia: update ethernet-phy node and handle name arch/arm/boot/dts/armada-385-turris-omnia.dts | 162 +++++++++++++++++- 1 file changed, 157 insertions(+), 5 deletions(-) -- 2.26.2
