On 11/14/2020 2:48 AM, Nishanth Menon wrote:
The default state of a device tree node is "okay". There is no specific
use of explicitly adding status = "okay" in the SoC dtsi.
Reviewed-by: Keerthy <j-keerthy@xxxxxx>
Signed-off-by: Nishanth Menon <nm@xxxxxx>
Reviewed-by: Tony Lindgren <tony@xxxxxxxxxxx>
Acked-by: Tero Kristo <t-kristo@xxxxxx>
Cc: Keerthy <j-keerthy@xxxxxx>
---
Change in v4: Dropped Fixes
V3: https://lore.kernel.org/linux-arm-kernel/20201112183538.6805-4-nm@xxxxxx/
V2: https://lore.kernel.org/linux-arm-kernel/20201112014929.25227-4-nm@xxxxxx/
V1: https://lore.kernel.org/linux-arm-kernel/20201104224356.18040-4-nm@xxxxxx/
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 --
2 files changed, 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index c842b9803f2d..116818912ba2 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -119,7 +119,6 @@ crypto: crypto@4e00000 {
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
- status = "okay";
dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
<&main_udmap 0x4001>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 137966c6be1f..19e602afdb05 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -345,8 +345,6 @@ main_crypto: crypto@4e00000 {
#size-cells = <2>;
ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
- status = "okay";
-
dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
<&main_udmap 0x4001>;
dma-names = "tx", "rx1", "rx2";
