Re: [PATCH v2 09/20] clk: sunxi: Add sun6i MBUS clock support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Jun 18, 2014 at 6:04 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> On Tue, Jun 17, 2014 at 10:52:46PM +0800, Chen-Yu Tsai wrote:
>> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/clock/sunxi.txt |  1 +
>>  drivers/clk/sunxi/clk-sunxi.c                     | 44 +++++++++++++++++++++++
>>  2 files changed, 45 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
>> index b9ec668..7b2ba41 100644
>> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
>> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
>> @@ -40,6 +40,7 @@ Required properties:
>>       "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
>>       "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
>>       "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
>> +     "allwinner,sun6i-a31-mbus-clk" - for the MBUS clocks on A31 / A23
>>       "allwinner,sun7i-a20-out-clk" - for the external output clocks
>>       "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
>>       "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
>> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
>> index eca3c6e..a086b5b 100644
>> --- a/drivers/clk/sunxi/clk-sunxi.c
>> +++ b/drivers/clk/sunxi/clk-sunxi.c
>> @@ -307,6 +307,37 @@ static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate,
>>
>>
>>  /**
>> + * sun6i_a31_get_mbus_factors() - calculates m factor for MBUS clocks
>> + * MBUS rate is calculated as follows
>> + * rate = parent_rate / (m + 1);
>> + */
>> +
>> +static void sun6i_a31_get_mbus_factors(u32 *freq, u32 parent_rate,
>> +                                    u8 *n, u8 *k, u8 *m, u8 *p)
>> +{
>> +     u8 div;
>> +
>> +     /* These clocks can only divide, so we will never be able to achieve
>> +      * frequencies higher than the parent frequency */
>> +     if (*freq > parent_rate)
>> +             *freq = parent_rate;
>> +
>> +     div = DIV_ROUND_UP(parent_rate, *freq);
>> +
>> +     if (div > 8)
>> +             div = 8;
>> +
>> +     *freq = parent_rate / div;
>> +
>> +     /* we were called to round the frequency, we can now return */
>> +     if (n == NULL)
>
> s/n/m/ ?

The factors clk driver passes all or none pointers.
But I will change this to avoid the confusion.

>> +             return;
>> +
>> +     *m = div - 1;
>> +}
>> +
>> +
>> +/**
>>   * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B
>>   * CLK_OUT rate is calculated as follows
>>   * rate = (parent_rate >> p) / (m + 1);
>> @@ -447,6 +478,11 @@ static struct clk_factors_config sun4i_mod0_config = {
>>       .pwidth = 2,
>>  };
>>
>> +static struct clk_factors_config sun6i_a31_mbus_config = {
>> +     .mshift = 0,
>> +     .mwidth = 3,
>
> Actually, the A31 has an extra N factor.
>
> So this mbus clock looks like it's only about the A23, and not the A31
> at all.

I checked original sun6i code and sun6i code found in the A23 SDK.
The original code uses the module 0 clock driver for mbus, so yes
there's an extra N factor. The new code in the A23 SDK does not.

Unfortunately I haven't been able to get my Hummingbird A31 up yet,
so I can't poke around to check it.


ChenYu
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux