Parts of ksz_common.h (struct ksz_device) will be required in
net/dsa/tag_ksz.c soon. So move the relevant parts into a new header
file.
Signed-off-by: Christian Eggers <ceggers@xxxxxxx>
---
MAINTAINERS | 1 +
drivers/net/dsa/microchip/ksz_common.h | 81 +---------------------
include/linux/dsa/ksz_common.h | 96 ++++++++++++++++++++++++++
3 files changed, 98 insertions(+), 80 deletions(-)
create mode 100644 include/linux/dsa/ksz_common.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d173fcbf119..de7e2d80426a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11520,6 +11520,7 @@ L: netdev@xxxxxxxxxxxxxxx
S: Maintained
F: Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
F: drivers/net/dsa/microchip/*
+F: include/linux/dsa/microchip/ksz_common.h
F: include/linux/platform_data/microchip-ksz.h
F: net/dsa/tag_ksz.c
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index cf866e48ff66..5735374b5bc3 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -7,92 +7,13 @@
#ifndef __KSZ_COMMON_H
#define __KSZ_COMMON_H
+#include <linux/dsa/ksz_common.h>
#include <linux/etherdevice.h>
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/phy.h>
-#include <linux/regmap.h>
-#include <net/dsa.h>
struct vlan_table {
u32 table[3];
};
-struct ksz_port_mib {
- struct mutex cnt_mutex; /* structure access */
- u8 cnt_ptr;
- u64 *counters;
-};
-
-struct ksz_port {
- u16 member;
- u16 vid_member;
- int stp_state;
- struct phy_device phydev;
-
- u32 on:1; /* port is not disabled by hardware */
- u32 phy:1; /* port has a PHY */
- u32 fiber:1; /* port is fiber */
- u32 sgmii:1; /* port is SGMII */
- u32 force:1;
- u32 read:1; /* read MIB counters in background */
- u32 freeze:1; /* MIB counter freeze is enabled */
-
- struct ksz_port_mib mib;
- phy_interface_t interface;
-};
-
-struct ksz_device {
- struct dsa_switch *ds;
- struct ksz_platform_data *pdata;
- const char *name;
-
- struct mutex dev_mutex; /* device access */
- struct mutex regmap_mutex; /* regmap access */
- struct mutex alu_mutex; /* ALU access */
- struct mutex vlan_mutex; /* vlan access */
- const struct ksz_dev_ops *dev_ops;
-
- struct device *dev;
- struct regmap *regmap[3];
-
- void *priv;
-
- struct gpio_desc *reset_gpio; /* Optional reset GPIO */
-
- /* chip specific data */
- u32 chip_id;
- int num_vlans;
- int num_alus;
- int num_statics;
- int cpu_port; /* port connected to CPU */
- int cpu_ports; /* port bitmap can be cpu port */
- int phy_port_cnt;
- int port_cnt;
- int reg_mib_cnt;
- int mib_cnt;
- int mib_port_cnt;
- int last_port; /* ports after that not used */
- phy_interface_t compat_interface;
- u32 regs_size;
- bool phy_errata_9477;
- bool synclko_125;
-
- struct vlan_table *vlan_cache;
-
- struct ksz_port *ports;
- struct delayed_work mib_read;
- unsigned long mib_read_interval;
- u16 br_member;
- u16 member;
- u16 mirror_rx;
- u16 mirror_tx;
- u32 features; /* chip specific features */
- u32 overrides; /* chip functions set by user */
- u16 host_mask;
- u16 port_mask;
-};
-
struct alu_struct {
/* entry 1 */
u8 is_static:1;
diff --git a/include/linux/dsa/ksz_common.h b/include/linux/dsa/ksz_common.h
new file mode 100644
index 000000000000..3b22380d85c5
--- /dev/null
+++ b/include/linux/dsa/ksz_common.h
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/* Included by drivers/net/dsa/microchip/ksz_common.h and net/dsa/tag_ksz.c */
+
+#ifndef _NET_DSA_KSZ_COMMON_H_
+#define _NET_DSA_KSZ_COMMON_H_
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <net/dsa.h>
+
+struct ksz_platform_data;
+struct ksz_dev_ops;
+struct vlan_table;
+
+struct ksz_port_mib {
+ struct mutex cnt_mutex; /* structure access */
+ u8 cnt_ptr;
+ u64 *counters;
+};
+
+struct ksz_port {
+ u16 member;
+ u16 vid_member;
+ int stp_state;
+ struct phy_device phydev;
+
+ u32 on:1; /* port is not disabled by hardware */
+ u32 phy:1; /* port has a PHY */
+ u32 fiber:1; /* port is fiber */
+ u32 sgmii:1; /* port is SGMII */
+ u32 force:1;
+ u32 read:1; /* read MIB counters in background */
+ u32 freeze:1; /* MIB counter freeze is enabled */
+
+ struct ksz_port_mib mib;
+ phy_interface_t interface;
+};
+
+struct ksz_device {
+ struct dsa_switch *ds;
+ struct ksz_platform_data *pdata;
+ const char *name;
+
+ struct mutex dev_mutex; /* device access */
+ struct mutex regmap_mutex; /* regmap access */
+ struct mutex alu_mutex; /* ALU access */
+ struct mutex vlan_mutex; /* vlan access */
+ const struct ksz_dev_ops *dev_ops;
+
+ struct device *dev;
+ struct regmap *regmap[3];
+
+ void *priv;
+
+ struct gpio_desc *reset_gpio; /* Optional reset GPIO */
+
+ /* chip specific data */
+ u32 chip_id;
+ int num_vlans;
+ int num_alus;
+ int num_statics;
+ int cpu_port; /* port connected to CPU */
+ int cpu_ports; /* port bitmap can be cpu port */
+ int phy_port_cnt;
+ int port_cnt;
+ int reg_mib_cnt;
+ int mib_cnt;
+ int mib_port_cnt;
+ int last_port; /* ports after that not used */
+ phy_interface_t compat_interface;
+ u32 regs_size;
+ bool phy_errata_9477;
+ bool synclko_125;
+
+ struct vlan_table *vlan_cache;
+
+ struct ksz_port *ports;
+ struct delayed_work mib_read;
+ unsigned long mib_read_interval;
+ u16 br_member;
+ u16 member;
+ u16 mirror_rx;
+ u16 mirror_tx;
+ u32 features; /* chip specific features */
+ u32 overrides; /* chip functions set by user */
+ u16 host_mask;
+ u16 port_mask;
+};
+
+#endif /* _NET_DSA_KSZ_COMMON_H_ */
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler
