On 12/11/2020 03:49, Nishanth Menon wrote:
The default state of a device tree node is "okay". There is no specific
use of explicitly adding status = "okay" in the board dts.
Fixes: 7e7e7dd51d06 ("arm64: dts: ti: k3-am654-base-board: enable USB1")
Signed-off-by: Nishanth Menon <nm@xxxxxx>
Cc: Roger Quadros <rogerq@xxxxxx>
Acked-by: Roger Quadros <rogerq@xxxxxx>
cheers,
-roger
---
Changes since v1:
- no change.
v1: https://lore.kernel.org/linux-arm-kernel/20201104224356.18040-5-nm@xxxxxx/
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 --------
1 file changed, 8 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 199c4d4e7539..744efcbb4f7f 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -325,14 +325,6 @@ &sdhci1 {
disable-wp;
};
-&dwc3_1 {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
&usb1 {
pinctrl-names = "default";
pinctrl-0 = <&usb1_pins_default>;
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
