On Mon, Nov 09, 2020 at 10:14:24PM +0800, Amireddy Mallikarjuna reddy wrote: > Add DT bindings YAML schema for DMA controller driver > of Lightning Mountain(LGM) SoC. > > Signed-off-by: Amireddy Mallikarjuna reddy <mallikarjunax.reddy@xxxxxxxxxxxxxxx> > --- > v1: > - Initial version. > > v2: > - Fix bot errors. > > v3: > - No change. > > v4: > - Address Thomas langer comments > - use node name pattern as dma-controller as in common binding. > - Remove "_" (underscore) in instance name. > - Remove "port-" and "chan-" in attribute name for both 'dma-ports' & 'dma-channels' child nodes. > > v5: > - Moved some of the attributes in 'dma-ports' & 'dma-channels' child nodes to dma client/consumer side as cells in 'dmas' properties. > > v6: > - Add additionalProperties: false > - completely removed 'dma-ports' and 'dma-channels' child nodes. > - Moved channel dt properties to client side dmas. > - Use standard dma-channels and dma-channel-mask properties. > - Documented reset-names > - Add description for dma-cells > > v7: > - modified compatible to oneof > - Reduced number of dma-cells to 3 > - Fine tune the description of some properties. > > v7-resend: > - rebase to 5.10-rc1 > > v8: > - rebased to 5.10-rc3 > - Fixing the bot issues (wrong indentation) > --- > .../devicetree/bindings/dma/intel,ldma.yaml | 134 +++++++++++++++++++++ > 1 file changed, 134 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/intel,ldma.yaml > > diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml > new file mode 100644 > index 000000000000..7cf0eab1a703 > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml > @@ -0,0 +1,134 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dma/intel,ldma.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Lightning Mountain centralized low speed DMA and high speed DMA controllers. > + > +maintainers: > + - chuanhua.lei@xxxxxxxxx > + - mallikarjunax.reddy@xxxxxxxxx > + > +allOf: > + - $ref: "dma-controller.yaml#" > + > +properties: > + $nodename: > + pattern: "^dma-controller(@.*)?$" Drop. Already covered by dma-controller.yaml. > + > + compatible: > + oneOf: > + - const: intel,lgm-cdma > + - const: intel,lgm-dma2tx > + - const: intel,lgm-dma1rx > + - const: intel,lgm-dma1tx > + - const: intel,lgm-dma0tx > + - const: intel,lgm-dma3 > + - const: intel,lgm-toe-dma30 > + - const: intel,lgm-toe-dma31 Use 'enum' instead of oneOf+const. > + > + reg: > + maxItems: 1 > + > + "#dma-cells": > + const: 3 > + description: > + The first cell is the peripheral's DMA request line. > + The second cell is the peripheral's (port) number corresponding to the channel. > + The third cell is the burst length of the channel. > + > + dma-channels: > + minimum: 1 > + maximum: 16 > + > + dma-channel-mask: > + items: > + minItems: 1 It should be maxItems you define. And 'items' should be dropped. > + > + clocks: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + reset-names: > + items: > + - const: ctrl > + > + interrupts: > + maxItems: 1 > + > + intel,dma-poll-cnt: > + $ref: /schemas/types.yaml#definitions/uint32 > + description: > + DMA descriptor polling counter is used to control the poling mechanism > + for the descriptor fetching for all channels. > + > + intel,dma-byte-en: > + type: boolean > + description: > + DMA byte enable is only valid for DMA write(RX). > + Byte enable(1) means DMA write will be based on the number of dwords > + instead of the whole burst. > + > + intel,dma-drb: > + type: boolean > + description: > + DMA descriptor read back to make sure data and desc synchronization. > + > + intel,dma-desc-in-sram: > + type: boolean > + description: > + DMA descritpors in SRAM or not. Some old controllers descriptors > + can be in DRAM or SRAM. The new ones are all in SRAM. > + > + intel,dma-orrc: > + $ref: /schemas/types.yaml#definitions/uint32 > + description: > + DMA outstanding read counter value determine the number of > + ORR-Outstanding Read Request. The maximum value is 16. blank line > + intel,dma-dburst-wr: > + type: boolean > + description: > + Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst; > + if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16. > + It only applies to RX DMA and memcopy DMA. > + > +required: > + - compatible > + - reg > + - '#dma-cells' dma-common.yaml covers this, you can drop it here. > + > +additionalProperties: false > + > +examples: > + - | > + dma0: dma-controller@e0e00000 { > + compatible = "intel,lgm-cdma"; > + reg = <0xe0e00000 0x1000>; > + #dma-cells = <3>; > + dma-channels = <16>; > + dma-channel-mask = <0xFFFF>; > + interrupt-parent = <&ioapic1>; > + interrupts = <82 1>; > + resets = <&rcu0 0x30 0>; > + reset-names = "ctrl"; > + clocks = <&cgu0 80>; > + intel,dma-poll-cnt = <4>; > + intel,dma-byte-en; > + intel,dma-drb; > + }; > + - | > + dma3: dma-controller@ec800000 { > + compatible = "intel,lgm-dma3"; > + reg = <0xec800000 0x1000>; > + clocks = <&cgu0 71>; > + resets = <&rcu0 0x10 9>; > + #dma-cells = <3>; > + intel,dma-poll-cnt = <16>; > + intel,dma-desc-in-sram; > + intel,dma-orrc = <16>; > + intel,dma-byte-en; > + intel,dma-dburst-wr; > + }; > -- > 2.11.0 >
