Add a device trees and FIT image support for the Microsemi Serval SoC
which belongs to same family of the Ocelot SoC.
It is based on the work of Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>.
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
---
arch/mips/boot/dts/mscc/Makefile | 5 +-
arch/mips/boot/dts/mscc/serval.dtsi | 153 +++++++++++++++++++++
arch/mips/boot/dts/mscc/serval_common.dtsi | 127 +++++++++++++++++
arch/mips/boot/dts/mscc/serval_pcb105.dts | 17 +++
arch/mips/boot/dts/mscc/serval_pcb106.dts | 17 +++
arch/mips/generic/Kconfig | 8 ++
arch/mips/generic/Platform | 1 +
arch/mips/generic/board-serval.its.S | 24 ++++
8 files changed, 351 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/boot/dts/mscc/serval.dtsi
create mode 100644 arch/mips/boot/dts/mscc/serval_common.dtsi
create mode 100644 arch/mips/boot/dts/mscc/serval_pcb105.dts
create mode 100644 arch/mips/boot/dts/mscc/serval_pcb106.dts
create mode 100644 arch/mips/generic/board-serval.its.S
diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
index befda72ceb26..eeb6b7aae83b 100644
--- a/arch/mips/boot/dts/mscc/Makefile
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -5,6 +5,9 @@ dtb-$(CONFIG_SOC_VCOREIII) += \
jaguar2_pcb118.dtb \
luton_pcb091.dtb \
ocelot_pcb120.dtb \
- ocelot_pcb123.dtb
+ ocelot_pcb123.dtb \
+ serval_pcb105.dtb \
+ serval_pcb106.dtb
+
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mscc/serval.dtsi b/arch/mips/boot/dts/mscc/serval.dtsi
new file mode 100644
index 000000000000..089ce89df190
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/serval.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mscc,serval";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ device_type = "cpu";
+ clocks = <&cpu_clk>;
+ reg = <0>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ gpio0 = &gpio;
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ cpu_clk: cpu-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <416666666>;
+ };
+
+ ahb_clk: ahb-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&cpu_clk>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ ahb: ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupt-parent = <&intc>;
+
+ cpu_ctrl: syscon@70000000 {
+ compatible = "mscc,ocelot-cpu-syscon", "syscon";
+ reg = <0x70000000 0x2c>;
+ };
+
+ intc: interrupt-controller@70000070 {
+ compatible = "mscc,serval-icpu-intr";
+ reg = <0x70000070 0x70>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ uart0: serial@70100000 {
+ pinctrl-0 = <&uart_pins>;
+ pinctrl-names = "default";
+ compatible = "ns16550a";
+ reg = <0x70100000 0x20>;
+ interrupts = <6>;
+ clocks = <&ahb_clk>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ uart2: serial@70100800 {
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
+ compatible = "ns16550a";
+ reg = <0x70100800 0x20>;
+ interrupts = <7>;
+ clocks = <&ahb_clk>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ gpio: pinctrl@71070034 {
+ compatible = "mscc,serval-pinctrl";
+ reg = <0x71070034 0x28>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 0 22>;
+
+ sgpio_pins: sgpio-pins {
+ pins = "GPIO_0", "GPIO_2", "GPIO_3", "GPIO_1";
+ function = "sg0";
+ };
+
+ i2c_pins: i2c-pins {
+ pins = "GPIO_6", "GPIO_7";
+ function = "twi";
+ };
+
+ uart_pins: uart-pins {
+ pins = "GPIO_26", "GPIO_27";
+ function = "uart";
+ };
+
+ uart2_pins: uart2-pins {
+ pins = "GPIO_13", "GPIO_14";
+ function = "uart2";
+ };
+
+ cs1_pins: cs1-pins {
+ pins = "GPIO_8";
+ function = "si";
+ };
+
+ irqext0_pins: irqext0-pins {
+ pins = "GPIO_28";
+ function = "irq0";
+ };
+
+ irqext1_pins: irqext1-pins {
+ pins = "GPIO_29";
+ function = "irq1";
+ };
+ };
+
+ i2c0: i2c@70100400 {
+ compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+ status = "disabled";
+ pinctrl-0 = <&i2c_pins>;
+ pinctrl-names = "default";
+ reg = <0x70100400 0x100>, <0x70000190 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <8>;
+ clock-frequency = <100000>;
+ clocks = <&ahb_clk>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/mscc/serval_common.dtsi b/arch/mips/boot/dts/mscc/serval_common.dtsi
new file mode 100644
index 000000000000..5b404836db5e
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/serval_common.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microsemi Corporation
+ */
+
+#include "serval.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ i2c104 = &i2c104;
+ i2c105 = &i2c105;
+ i2c106 = &i2c106;
+ i2c107 = &i2c107;
+ i2c108 = &i2c108;
+ i2c109 = &i2c109;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ i2c0_imux: i2c0-imux{
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-parent = <&i2c0>;
+ pinctrl-names =
+ "i2c104", "i2c105", "i2c106", "i2c107",
+ "i2c108", "i2c109", "idle";
+ pinctrl-0 = <&i2cmux_0>;
+ pinctrl-1 = <&i2cmux_1>;
+ pinctrl-2 = <&i2cmux_2>;
+ pinctrl-3 = <&i2cmux_3>;
+ pinctrl-4 = <&i2cmux_4>;
+ pinctrl-5 = <&i2cmux_5>;
+ pinctrl-6 = <&i2cmux_pins_i>;
+ i2c104: i2c_sfp0@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c105: i2c_sfp1@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c106: i2c_sfp2@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c107: i2c_sfp3@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c108: i2c_sfp4@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ i2c109: i2c_sfp5@5 {
+ reg = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&gpio {
+ i2c_pins: i2c-pins {
+ pins = "GPIO_7"; /* No "default" scl for i2c0 */
+ function = "twi";
+ };
+ i2cmux_pins_i: i2cmux-pins-i {
+ pins = "GPIO_11", "GPIO_12", "GPIO_18", "GPIO_19",
+ "GPIO_20", "GPIO_21";
+ function = "twi_scl_m";
+ output-low;
+ };
+ i2cmux_0: i2cmux-0 {
+ pins = "GPIO_11";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_1: i2cmux-1 {
+ pins = "GPIO_12";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_2: i2cmux-2 {
+ pins = "GPIO_18";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_3: i2cmux-3 {
+ pins = "GPIO_19";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_4: i2cmux-4 {
+ pins = "GPIO_20";
+ function = "twi_scl_m";
+ output-high;
+ };
+ i2cmux_5: i2cmux-5 {
+ pins = "GPIO_21";
+ function = "twi_scl_m";
+ output-high;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-sda-hold-time-ns = <300>;
+};
+
diff --git a/arch/mips/boot/dts/mscc/serval_pcb105.dts b/arch/mips/boot/dts/mscc/serval_pcb105.dts
new file mode 100644
index 000000000000..a1b0012b79d3
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/serval_pcb105.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "serval_common.dtsi"
+
+/ {
+ model = "Serval PCB105 Reference Board";
+ compatible = "mscc,serval-pcb105", "mscc,serval";
+
+ aliases {
+ };
+
+};
+
diff --git a/arch/mips/boot/dts/mscc/serval_pcb106.dts b/arch/mips/boot/dts/mscc/serval_pcb106.dts
new file mode 100644
index 000000000000..237be7c8da57
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/serval_pcb106.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+/dts-v1/;
+#include "serval_common.dtsi"
+
+/ {
+ model = "Serval PCB106 Reference Board";
+ compatible = "mscc,serval-pcb106", "mscc,serval";
+
+ aliases {
+ };
+
+};
+
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index c7a840b8eaa6..657dd93c5e76 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -94,6 +94,14 @@ config FIT_IMAGE_FDT_JAGUAR2
from Microsemi in the FIT kernel image.
This requires u-boot on the platform.
+config FIT_IMAGE_FDT_SERVAL
+ bool "Include FDT for Microsemi Serval development platforms"
+ select SOC_VCOREIII
+ help
+ Enable this to include the FDT for the Serval development platforms
+ from Microsemi in the FIT kernel image.
+ This requires u-boot on the platform.
+
config BOARD_INGENIC
bool "Support boards based on Ingenic SoCs"
select MACH_INGENIC_GENERIC
diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform
index 3f2055bea596..b871af16b5b6 100644
--- a/arch/mips/generic/Platform
+++ b/arch/mips/generic/Platform
@@ -22,4 +22,5 @@ its-$(CONFIG_FIT_IMAGE_FDT_NI169445) += board-ni169445.its.S
its-$(CONFIG_FIT_IMAGE_FDT_OCELOT) += board-ocelot.its.S
its-$(CONFIG_FIT_IMAGE_FDT_LUTON) += board-luton.its.S
its-$(CONFIG_FIT_IMAGE_FDT_JAGUAR2) += board-jaguar2.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_SERVAL) += board-serval.its.S
its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += board-xilfpga.its.S
diff --git a/arch/mips/generic/board-serval.its.S b/arch/mips/generic/board-serval.its.S
new file mode 100644
index 000000000000..4ea4fc9d757f
--- /dev/null
+++ b/arch/mips/generic/board-serval.its.S
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+ images {
+ fdt@serval_pcb105 {
+ description = "MSCC Serval PCB105 Device Tree";
+ data = /incbin/("boot/dts/mscc/serval_pcb105.dtb");
+ type = "flat_dt";
+ arch = "mips";
+ compression = "none";
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ pcb105 {
+ description = "Serval Linux kernel";
+ kernel = "kernel@0";
+ fdt = "fdt@serval_pcb105";
+ ramdisk = "ramdisk";
+ };
+ };
+};
--
2.28.0
